Chop Saw Blades DP "HR" - nn-System DP flex

CNC machining centers and aggregates
for precise cutting in all common wood-based panels such as raw and laminated particle and MDF boards, plywood boards, HDF, WPC, cement and gypsum fiber boards, mineral composites, Alucobond, ...
for ripping and cross cuts in solid wood, glued laminated timber, thermotreated wood

hardly perceivable noise level
highest productivity and economic efficiency thanks to extremely long edge lives due to DP-tipping
reduced cutting pressure thanks to hollow back tooth geometry

it is not recommended to use the saw blades for longitudinal cuts in soft wood and material thicknesses of more than 40 mm
chip-free cuts can only be guaranteed in combination with a suitable scoring saw blade

	Ø D [mm]	B [mm]	b [mm]	Ø d [mm]	Z	NL	Hook angle [°]	Tooth geometry	Machine/Type	Ident-No.	Comp./ Inqu.
Dimensions entered are not listed? Please contact our application consulting . available from stock available on short notice Delivery time on request
	180	2,5	2	30	36	2 x 4/6/52	10	HR	Homag, Weeke	192432	\|
	180	2,5	2	40	36	8/6/52	10	HR	Homag, Weeke	193319	\|
	200	2,5	2	30	40	2 x 4/6/52	10	HR	Homag	192433	\|
	200	2,5	2	30	40	2/6,2/42 + 4/6,6/60	10	HR	IMA	192434	\|
	220	2,5	2	30	44		10	HR		192435	\|
	220	2,5	2	40	44	8/6/52	10	HR	Homag, Weeke	192436	\|
	240	2,5	2	30	50	2 x 4/6/52	10	HR	Homag	192437	\|
	240	2,5	2	40	50	8/6/52	10	HR	Homag, Weeke	192438	\|
	240	2,5	2	30	50	2/6,2/42 + 4/6,6/60	10	HR	IMA	192439	\|