193146 - Panel Sizing Saw Blades HW - Q-Cut "G6"
Product
Drawing
-
-
- Tungsten Carbide [HW]
-
Technical data
Description
Machine / Application
- panel sizing saws
- for finish cuts in veneered, foiled or melamine-laminated panels, in single sheets or in stacks
Design
- vibration and noise damping ornaments
- additional expansion slots
- up to ØD=370, 10 degree hook angle
- from ØD=380, 15 degree hook angle
- tooth configuration: G6
- cutting material: HW HL Board 04 plus
Advantages
- for highest performance demands
- impressive cutting quality thanks to exact and precise cuts
- reduced cutting pressure and optimized cutting geometry G6
- extremely low-noise and smooth running thanks to reinforced body and vibration and noise damping ornaments
- clearly increased edge life thanks to improved HW grade
Notes
- projection: min 20 - 25 mm
- NL**- Combi3 = 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42
- NL**- Combi5 = 2/7/110 + 2/9/110 + 2/8,4/130 + 2/14/110 + 4/9/100 + 4/19/120
- NL**- Combi7 = 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 350 [mm] | |
| B = Cutting width | 4,4 [mm] | |
| b = Body thickness | 3.3 [mm] | |
| Ø d = Bore diameter | 30 [mm] | |
| Z = No. of teeth | 72 | |
| NL = Pin holes | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 + 2/13/94 | |
| Hook angle = Hook angle | 10 [°] | |
| Tooth geometry = Tooth configuration | G6 | |
| LEUCODUR = Cutting material | HL Board 04 plus | |
| L = Delivery Status | ||
| Machine/Type | SCM, Panhans, Mayer, Schelling, HOLZ-HER | |
|
Dimensions entered are not listed?
available from stock |
||
suitable scoring saw blade
| Product picture | Description | Design | Ident-No. | ||
|---|---|---|---|---|---|
|
Scoring Saw Blades HW "WS" | Ø250x4,55xØ30 Z=48 NL/DKN= 2/10/60 | 181999 | ||
|
Scoring Saw Blades HW - adjustable "WS" | Ø125x4,0-4,8xØ45 Z=2x20 | 193257 | ||
|
Scoring Saw Blades HW "KO-F" - nn-System | Ø180x4,45-5,25xØ30 Z=36 NL/DKN= 2/10/60 | 192700 | ||
|
|
Scoring Saw Blades HW "KO-F" - nn-System | Ø200x4,45-5,25xØ20 Z=36 NL/DKN= 2/11/66 | 192703 | ||
|
|
Scoring Saw Blades HW "KO-F" - nn-System | Ø280x4,45-5,25xØ30 Z=48 NL/DKN= 2/10/60 + 2/11/66 | 192711 | ||
|
Scoring Saw Blades HW "KO-HR" - nn-System | Ø180x4,45-5,25xØ30 Z=30 NL/DKN= 2/10/60 | 192687 | ||
|
|
Scoring Saw Blades HW "KO-HR" - nn-System | Ø200x4,45-5,25xØ30 Z=36 NL/DKN= 2/10/60 | 192692 | ||
|
|
Scoring Saw Blades HW "KO-HR" - nn-System | Ø150x4,45-5,25xØ30 Z=28 | 193219 | ||
|
Scoring Saw Blades HW "KO-WS" | Ø125x4,45-5,25xØ45 Z=20 | 192725 | ||
|
|
Scoring Saw Blades HW "KO-WS" | Ø125x4,45-5,25xØ45 Z=24 | 192726 | ||
|
|
Scoring Saw Blades HW "KO-WS" | Ø150x4,45-5,25xØ30 Z=24 | 192727 | ||
|
|
Scoring Saw Blades HW "KO-WS" | Ø180x4,45-5,25xØ20 Z=30 NL/DKN= 2/9/60 | 192732 | ||
|
|
Scoring Saw Blades HW "KO-WS" | Ø180x4,45-5,25xØ30 Z=30 NL/DKN= 2/10/60 | 192733 | ||
|
|
Scoring Saw Blades HW "KO-WS" | Ø200x4,45-5,25xØ30 Z=36 NL/DKN= 2/10/60 | 192741 | ||
|
|
Scoring Saw Blades HW "KO-WS" | Ø300x4,45-5,25xØ30 Z=48 NL/DKN= 2/11/73 + 2/13/94 | 192751 | ||
|
available from stock |
|||||
