189852 - NF-Chop Saw Blades HW - negative hook angle "TR-F" highline
Product
Drawing
-
-
- Tungsten Carbide [HW]
-
Technical data
Description
Machine / Application
- chop and miter saws
- for clipping and mitre cuts in aluminum and plastic profiles
Design
- negative hook angle
- tooth configuration: triple chip / flat "TR-F"
- cutting material: HW HL Board 10
Advantages
- noise-reduction thanks to laser ornaments
Notes
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 300 [mm] | |
| B = Cutting width | 3,2 [mm] | |
| b = Body thickness | 2.5 [mm] | |
| Ø d = Bore diameter | 32 [mm] | |
| Z = No. of teeth | 72 | |
| NL = Pin holes | 2/7/42 + 2/9/46 + 2/10/60 | |
| Hook angle = Hook angle | -6 [°] | |
| Tooth geometry = Tooth configuration | TR-F | |
| LEUCODUR = Cutting material | HL Board 10 | |
| L = Delivery Status | ||
| Machine/Type | ELU MGS 73, Rapid, Trennjäger, Fezer, Berg&Schmid | |
|
Dimensions entered are not listed?
available from stock |
||
