Directly to the tool


Workpiece material

Machine

Applications

Features

LEUCO product names

Reset


Selection via tool type


NF-Chop Saw Blades HW - negative hook angle "TR-F" highline

Product

Drawing

  • Tungsten Carbide [HW]

Article

Description

Machine / Application

  • chop and miter saws
  • for clipping and mitre cuts in aluminum and plastic profiles

Design

  • negative hook angle
  • tooth configuration: triple chip / flat "TR-F"
  • cutting material: HW HL Board 10

Advantages

  • noise-reduction thanks to laser ornaments

Notes

Table- and picture caption ...

Ø D
[mm]
B
[mm]
b
[mm]
Ø d
[mm]
Z NL Hook angle
[°]
Tooth geometry LEUCODUR Machine/Type Ident-No. Comp./ Inqu.

Dimensions entered are not listed?
Please contact our application consulting .

available from stock
available on short notice
Delivery time on request

250 3,2 2.5 30 60 2/7/42 -6 TR-F HL Board 10 DeWALT, ELU, Haffner, Makita 189846 
|
250 2,8 2.2 30 80 2/7/42 -6 TR-F HL Board 10 ELU, Mafell, Metabo, Festo, Haffner, Hitachi 189847 
|
250 3,2 2.5 30 80 2/7/42 -6 TR-F HL Board 10 DeWALT, ELU, Haffner, Makita 189848 
|
250 3,2 2.5 32 80 2/7/42 + 2/9/46 + 2/10/60 -6 TR-F HL Board 10 Kaltenbach TL 250, ELU TGS 71, 171, 172, Baier, Fezer, Ulmia, Trennjäger 189849 
|
275 3,2 2.5 40 88 4/12/64 + 2/9/55 -6 TR-F HL Board 10 Eisele LMS I new, Graule, Trennjäger, Weidmann 189850 
|
300 3,2 2.5 30 72 2/7/42 + 2/10/60 -6 TR-F HL Board 10 DeWALT, Fezer, Schleicher 189851 
|
300 3,2 2.5 32 72 2/7/42 + 2/9/46 + 2/10/60 -6 TR-F HL Board 10 ELU MGS 73, Rapid, Trennjäger, Fezer, Berg&Schmid 189852 
|
300 2,8 2.2 30 96 2/7/42 + 2/10/60 -6 TR-F HL Board 10 189853 
|
300 3,2 2.5 30 96 2/7/42 + 2/10/60 -6 TR-F HL Board 10 DeWALT, Fezer, Schleicher 189854 
|
300 3,2 2.5 32 96 2/7/42 + 2/9/46 + 2/10/60 -6 TR-F HL Board 10 ELU MGS 73, Rapid, Trennjäger, Fezer, Berg&Schmid 189855 
|
330 3,2 2.5 30 96 2/10/60 + 2/9/46 + 2/7/42 -6 TR-F HL Board 10 ELU, Haffner 189856 
|
330 3,2 2.5 32 96 2/10/60 + 2/9/46 + 2/7/42 -6 TR-F HL Board 10 ELU 189857 
|