Directly to the tool


Workpiece material

Machine

Applications

Features

LEUCO product names

Reset


Selection via tool type


80206577 - Hogger Rings HW "F"

Product

Drawing

  • Tungsten Carbide [HW]

Comp./ Inqu. |

Technical data

Description

Machine / Application

  • chipping line rough and fine cut
  • for longitudinal cuts in wet and dry soft woods

Design

  • tooth configuration: flat "F"
  • cutting material: HW HL Solid 15 or HL Board 20

Advantages

  • extremely high bending strength and hardness of the teeth

Notes

  • the saw blade is optimized according to the LEUCO company standards as well as according to the customers specifications and machine parameters after consultation with the technical engineering
  • Ident-No. is only for orientation
Feature Value
Ø D = Cutting circle diameter 620 [mm]
B = Cutting width 5,0 [mm]
b = Body thickness 3.8 [mm]
b1 = Hub width 1 5 [mm]
Ø D1 = Hub diameter 540 [mm]
Ø d = Bore diameter 450 [mm]
Z = No. of teeth 60-3
Free slots = Free slots 3 [pc.]
Hook angle = Hook angle 15 [°]
L/R = cutting direction L
Tooth geometry = Tooth configuration F
LEUCODUR = Cutting material HL Board 20
L = Delivery Status

Dimensions entered are not listed?
Please contact our application consulting .

available from stock
available on short notice
Delivery time on request

Downloads