193242 - Trimming Saw Blades HW - with chip limiter "WS" - topline
Product
Drawing
-
-
- Tungsten Carbide [HW]
-
Technical data
Description
Machine / Application
- Table saws
- Suitable for manual feed
- for sizing cuts in solid woods
- especially for knotty woods
Design
- tooth configuration: alternate top bevel "WS"
- cutting material: HW HL Board 20
Advantages
- no chipped edges from knots thanks to chip limiter
- noise-reduction thanks to laser ornaments
Notes
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 400 [mm] | |
| B = Cutting width | 4,0 [mm] | |
| b = Body thickness | 2.8 [mm] | |
| Ø d = Bore diameter | 30 [mm] | |
| Z = No. of teeth | 36 | |
| NL = Pin holes | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 | |
| Hook angle = Hook angle | 20 [°] | |
| Corner∡ = Corner angle | 10 [°] | |
| Tooth geometry = Tooth configuration | WS | |
| LEUCODUR = Cutting material | HL Board 20 | |
| L = Delivery Status | ||
|
Dimensions entered are not listed?
available from stock |
||
