NF-Chop Saw Blades HW - positive hook angle "TR-F" highline
Article
Description
Machine / Application
- table saws
- for dividing and miter cuts in aluminum and plastic profiles as well as for wood-based panels (Corian®, Noblan, Varicor® and HPL)
Design
- positive hook angle
- tooth configuration: triple chip / flat "TR-F"
- cutting material: HW HL Board 10
Advantages
- noise-reduction thanks to laser ornaments
Notes
- tight workpiece clamping required
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z | NL |
Hook angle
[°] |
Tooth geometry | LEUCODUR | Machine/Type | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
||||||||||||
250 | 3,2 | 2.5 | 30 | 80 | 2/7/42 + 2/9/46 + 2/10/60 | 5 | TR-F | HL Board 10 | Haffner, ELU, Makita | 189877 | ||
300 | 3,2 | 2.5 | 30 | 72 | 2/7/42 + 2/9/46 + 2/10/60 | 5 | TR-F | HL Board 10 | Fezer, Rapid | 189878 | ||
300 | 3,2 | 2.5 | 30 | 96 | 2/7/42 + 2/9/46 + 2/10/60 | 5 | TR-F | HL Board 10 | Fezer, Rapid | 189879 | ||
300 | 3,2 | 2.5 | 32 | 96 | 5 | TR-F | HL Board 10 | 189880 |