Directly to the tool


Workpiece material

Machine

Applications

Features

LEUCO product names

Reset


Selection via tool type


188051 - Gang-Rip Saw Blades HW "WS"

Product

Drawing

  • Tungsten Carbide [HW]

Comp./ Inqu. |

Technical data

Description

Machine / Application

  • molders
  • gang-rip saws with one or two shafts
  • for precise ripping cuts in dry and planed solid woods and wood-based materials

Design

  • staggered double keyways of type A and C
  • tooth configuration: alternate top bevel "WS"
  • cutting material: HW HL Board 06 for wood-based materials
  • cutting material: HW HL Board 20 for solid woods

Advantages

  • staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine

Notes

  • larger bore (max. Ø 100 in) available for a surcharge
  • for inquiries / orders enclose specification sheet (see appendix)
Feature Value
Ø D = Cutting circle diameter 220 [mm]
B = Cutting width 3,4 [mm]
b = Body thickness 2.2 [mm]
Ø d = Bore diameter 50 [mm]
Z = No. of teeth 24
Hook angle = Hook angle 20 [°]
Corner∡ = Corner angle 10 [°]
Tooth geometry = Tooth configuration WS
LEUCODUR = Cutting material HL Board 20
L = Delivery Status

Dimensions entered are not listed?
Please contact our application consulting .

available from stock
available on short notice
Delivery time on request

Downloads