192798 - Sizing Saw Blades HW "G5"
Technical data
Description
Machine / Application
- table saws
- chop and miter saws
- for chip-free sizing cuts as well as clipping and mitre cuts in wood-based panels, solid woods and plastics
Design
- tooth configuration: G5
- cutting material: HW HL Board 04 plus
Advantages
- excellent cutting quality for cross cuts
- excellent cutting quality thanks to special tooth geometry
- extremely long edge lives
- noise-reduction thanks to laser ornaments
Notes
- pay attention to nmax!!!
- NL**- Combi3 = 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 450 [mm] | |
B = Cutting width | 3,6 [mm] | |
b = Body thickness | 2.8 [mm] | |
Ø d = Bore diameter | 30 [mm] | |
Z = No. of teeth | 130 | |
NL = Pin holes | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 | |
Hook angle = Hook angle | 15 [°] | |
Shear∡ = Shear angle | 15 [°] | |
Tooth geometry = Tooth configuration | G5 | |
nmax = maximum RPM | 3,180 [min-1] | |
LEUCODUR = Cutting material | HL Board 04 plus | |
L = Delivery Status | ||
Dimensions entered are not listed?
available from stock |