Sierras para tronzadoras e ingletadoras HW para metales no férreos - profiles "G7"
Article
Description
Machine / Application
- clipping and miter saws
- table saws
- clipping and miter cuts in PVC profiles
- for burr-free and smooth cuts in aluminum window and façade profiles
Design
- positive or negative hook angle
- tooth configuration: "G7"
- cutting material: HW HL Board 06
Advantages
- reduced cutting pressure thanks to group tooth geometry
- excellent burr-free cuts with low roughness thanks to tooth partition
- extremely noise-reduced thanks to special laser ornaments
- increased edge life compared to chop saw blades with tooth configuration "TR-F"
- increased performance and economic efficiency
Notes
- Secure workpiece clamping required
- Max. wall thickness 5 mm
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z | NL |
Hook angle
[°] |
Tooth geometry | Cutting quality* | LEUCODUR | Machine/Type | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||||||
300 | 3,2 | 2.5 | 30 | 98 | 2/7/42 + 2/9/46 + 2/10/60 + 2/11/70 | 5 | G7 | ▲▲▲▲ | HL Board 06 | 192663 | |||
350 | 3,2 | 2.5 | 30 | 98 | 2/7/42 + 2/9/46 + 2/10/60 | 5 | G7 | ▲▲▲▲ | HL Board 06 | 192662 | |||
400 | 3,8 | 3.2 | 30 | 98 | 2/7/42 + 2/9/46 + 2/10/60 + 2/15/80 + 4/12/64 | 5 | G7 | ▲▲▲▲ | HL Board 06 | 192659 | |||
420 | 3,8 | 3.2 | 30 | 98 | 5 | G7 | ▲▲▲▲ | HL Board 06 | 192660 | ||||
420 | 3,8 | 3.2 | 32 | 98 | 2/12/64 | 5 | G7 | ▲▲▲▲ | HL Board 06 | 193361 | |||
500 | 4,0 | 3.4 | 30 | 126 | 2/7/42 + 2/9/46 + 2/10/60 + 2/10/70 + 4/12/64 | 5 | G7 | ▲▲▲▲ | HL Board 06 | 192661 | |||
250 | 3,2 | 2.5 | 30 | 84 | 2/7/42 + 2/9/46 + 2/9,5/46,5 + 2/10/60 | -6 | G7 | ▲▲▲▲ | HL Board 06 | 192965 | |||
300 | 3,2 | 2.5 | 30 | 98 | 2/7/42 + 2/9/46 + 2/10/60 + 2/11/70 | -6 | G7 | ▲▲▲▲ | HL Board 06 | 192568 | |||
350 | 3,5 | 2.8 | 30 | 98 | 2/7/42 + 2/9/46 + 2/9,5/46,5 + 2/10/60 | -6 | G7 | ▲▲▲▲ | HL Board 06 | DeWALT, Haffner, Pfeiffer, Rotox | 192274 | ||
350 | 3,2 | 2.5 | 30 | 112 | 2/7/42 + 2/9/46 + 2/9,5/46,5 + 2/10/60 | -6 | G7 | ▲▲▲▲ | HL Board 06 | 192275 | |||
350 | 3,2 | 2.5 | 32 | 112 | 2/12/64 | -6 | G7 | ▲▲▲▲ | HL Board 06 | Emmegi | 193355 | ||
350 | 3,8 | 3.2 | 40 | 84 | 4/12/64 + 2/9/55 | -6 | G7 | ▲▲▲▲ | HL Board 06 | Eisele LSM II, -LSM II-PV, -VA-L, Graule, Ulmia, Weidmann | 192273 | ||
380 | 3,8 | 3.2 | 32 | 112 | -6 | G7 | ▲▲▲▲ | HL Board 06 | Elumatec | 192567 | |||
400 | 3,8 | 3.2 | 30 | 98 | 2/10/60 + 2/12/64 + 4/15/80 | -6 | G7 | ▲▲▲▲ | HL Board 06 | DeWALT, Haffner | 192276 | ||
400 | 3,8 | 3.2 | 30 | 126 | 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 + 2/12/64 | -6 | G7 | ▲▲▲▲ | HL Board 06 | Rapid | 193356 | ||
400 | 3,2 | 2.5 | 32 | 126 | 2/12/64 | -6 | G7 | ▲▲▲▲ | HL Board 06 | Emmegi | 193357 | ||
420 | 4,0 | 3.2 | 30 | 98 | 2/10/60 + 2/11/70 | -6 | G7 | ▲▲▲▲ | HL Board 06 | Rapid, ELU | 192277 | ||
450 | 3,8 | 3.2 | 30 | 112 | 2/12/64 + 4/15/80 | -6 | G7 | ▲▲▲▲ | HL Board 06 | DeWALT, Haffner | 192278 | ||
450 | 3,8 | 3.2 | 32 | 112 | 2/12/64 | -6 | G7 | ▲▲▲▲ | HL Board 06 | Emmegi | 193358 | ||
450 | 3,8 | 3.2 | 32 | 126 | 2/12/64 | -6 | G7 | ▲▲▲▲ | HL Board 06 | Emmegi | 193359 | ||
500 | 4,0 | 3.4 | 30 | 126 | 2/11/70 + 2/10/60 | -6 | G7 | ▲▲▲▲ | HL Board 06 | Pfeiffer, Rapid | 192279 | ||
500 | 4,0 | 3.2 | 32 | 126 | 2/12/64 | -6 | G7 | ▲▲▲▲ | HL Board 06 | Emmegi | 193360 | ||
550 | 4,0 | 3.4 | 30 | 133 | 2/10/60 + 2/12/64 + 4/15/80 | -6 | G7 | ▲▲▲▲ | HL Board 06 | Pfeiffer, Rapid, Elumatec | 192392 | ||
600 | 4,6 | 4 | 32 | 140 | -6 | G7 | ▲▲▲▲ | HL Board 06 | Pfeiffer, Rapid | 193341 |