Directly to the tool


Workpiece material

Machine

Applications

Features

LEUCO product names

Reset


Selection via tool type


Gang-Rip Saw Blades HW with HW-rakers "F"

Product

Drawing

  • Tungsten Carbide [HW]

Article

Description

Machine / Application

  • molders
  • gang-rip saws with one or two shafts
  • for longitudinal cuts in wet and dry soft woods

Design

  • tooth configuration: flat "F"
  • cutting material: HW HL Board 20
  • type A and C with staggered double keyways

Advantages

  • tungsten carbide rakers prevent the sides of the wood from making contact with the steel plate
  • staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine

Notes

  • for inquiries / orders enclose specification sheet (see appendix)
  • for cutting height > 50 mm

Table- and picture caption ...

Ø D
[mm]
B
[mm]
b
[mm]
Ø d
[mm]
Ø dmax
[mm]
Max. flange Ø
[mm]
Z Number of rakers
[pc.]
DKN
[mm]
NL Hook angle
[°]
Tooth geometry LEUCODUR Ident-No. Comp./ Inqu.

Dimensions entered are not listed? 
Please contact our application consulting.

available from stock
available on short notice
Delivery time on request

180 2,4 1.6 40 55 95 16 2 20 F HL Board 20 188096 
|
200 2,0 1.4 40 75 115 16 2 20 F HL Board 20 188097 
|
200 2,4 1.6 40 75 115 16 2 20 F HL Board 20 188098 
|
225 2,4 1.6 40 80 120 16 2 20 F HL Board 20 188100 
|
250 2,4 1.6 40 80 125 16 2 20 F HL Board 20 188101 
|
250 2,8 1.8 70 125 24 2 20x5 20 F HL Board 20 189290 
|
300 3,2 2.2 70 120 16 2+2 20,0x5 20 F HL Board 20 189293 
|
300 3,4 2.2 80 120 16 2+2 12,5x4,5 20 F HL Board 20 189296 
|
300 3,2 2.2 70 120 28 2+2 20,0x5 20 F HL Board 20 189294 
|
300 3,2 2.2 80 125 16 2+2 18,5x5 6/5,5/91 + 4/6,6/95 + 2/13/100 20 F HL Board 20 189295 
|
350 3,5 2.5 70 120 20 2+2 20x5 20 F HL Board 20 189297 
|
350 3,8 2.5 80 125 20 2+2 18,5x5 6/5,5/91 + 4/6,6/95 + 2/13/100 20 F HL Board 20 189299 
|