Scraper Knives HW with 2 cutting edges and radius - working centers (topcoat, chamfer to prevent material fracturing)
Article
Description
Machine / Application
- machines Homag combined with flush-cutting unit No. 1-056-11-0621
Design
- 6 degree profile run-out
- cutting material: HW
- HL Board 06 for wood-based panels, plastics and hard woods
- topcoat coating
- cutting edge with chamfer to prevent material fracturing
Advantages
- no material fracturing also in the case of PP-edges
- no additional work steps needed
Notes
R
[mm] |
B
[mm] |
H
[mm] |
S
[mm] |
Ø d
[mm] |
Profile run-out
[°] |
LEUCODUR |
PU
[pc.] |
Remarks | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||||
1,0 | 20 | 11.5 | 2 | 5,0 | 6 | HL Board 06 | 2 | 185667 | |||
1,5 | 20 | 11.5 | 2 | 5,0 | 6 | HL Board 06 | 2 | 180025 | |||
2,0 | 20 | 11.5 | 2 | 5,0 | 6 | HL Board 06 | 2 | 180020 | |||
2,5 | 20 | 11.5 | 2 | 5,0 | 6 | HL Board 06 | 2 | 180021 | |||
3,0 | 20 | 11.5 | 2 | 5,0 | 6 | HL Board 06 | 2 | 180022 | |||
4,0 | 20 | 11.5 | 2 | 5,0 | 6 | HL Board 06 | 2 | 185295 | |||
2,0 | 20 | 11.5 | 2 | 5,0 | 6 | HL Board 06 topcoat | 2 | topcoat | 185387 | ||
1,0 | 20 | 11.5 | 2 | 5,0 | 6 | HL Board 06 topcoat | 2 | topcoat + chamfer to prevent material fracturing | 185159 | ||
1,5 | 20 | 11.5 | 2 | 5,0 | 6 | HL Board 06 topcoat | 2 | topcoat + chamfer to prevent material fracturing | 185160 | ||
2,0 | 20 | 11.5 | 2 | 5,0 | 6 | HL Board 06 topcoat | 2 | topcoat + chamfer to prevent material fracturing | 185161 | ||
2,5 | 20 | 11.5 | 2 | 5,0 | 6 | HL Board 06 topcoat | 2 | topcoat + chamfer to prevent material fracturing | 185162 | ||
3,0 | 20 | 11.5 | 2 | 5,0 | 6 | HL Board 06 topcoat | 2 | topcoat + chamfer to prevent material fracturing | 185163 |