Turnover Knives HW with 2 cutting edges, edge bevel and end sharpened
Article
Description
Machine / Application
- for use in V-grooving cutterheads and prism cutterheads
Design
- grinding angle 55 degrees
- cutting material: HW
- HL Board 05 for wood-based panels, plastics and hard woods
Advantages
Notes
- packing unit: 10 pieces
Dimension
[mm] |
B
[mm] |
H
[mm] |
S
[mm] |
Ø d
[mm] |
L
[mm] |
Type |
Wedge∡
[°] |
Clearance ∡ 1
[°] |
Clearance ∡ 2
[°] |
LEUCODUR |
PU
[pc.] |
L/R | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||||||||
19,5x12x1,5 | 19,5 | 12 | 1.5 | 4,0 | 2 | 55 | 3.5 | 10 | HL Board 05 | 10 | L | 160626 | |||
19,5x12x1,5 | 19,5 | 12 | 1.5 | 4,0 | 2 | 55 | 3.5 | 10 | HL Board 05 | 10 | R | 160625 | |||
29,5x12x1,5 | 29,5 | 12 | 1.5 | 4,0 | 14 | 2 | 55 | 5 | HL Board 05 | 10 | L | 003119 | |||
29,5x12x1,5 | 29,5 | 12 | 1.5 | 4,0 | 14 | 2 | 55 | 5 | HL Board 05 | 10 | R | 003118 | |||
49,2x12x1,5 | 49,2 | 12 | 1.5 | 4,0 | 26 | 2 | 55 | 5 | HL Board 05 | 10 | L | 003121 | |||
49,2x12x1,5 | 49,2 | 12 | 1.5 | 4,0 | 26 | 2 | 55 | 5 | HL Board 05 | 10 | R | 003120 |