SetProfiler set - profiling

significantly improved cutting edges
excellent cutting quality
compared to uncoated HW-Blanks the edge lives is 2 - 3 times as long
high economic efficiency thanks to reduced use of grinding wheels, as knives and support plates are profiled separately whereas only the knives are re-ground
adjustable knives by means of serration between knive and support plate; 5 adjustments of 1,6 mm = 8 mm sharpening area

serration 60 degrees and partition 1,6 mm for profiling of solid woods and wood-based panels
blank height 50 and 60 mm for RPM up to 12,000 min-2
T = profile depth
from safety reasons please always mount knives and support plates with equal weight (packing unit VE) opposite each other

	B [mm]	H [mm]	S [mm]	Tmax [mm]	LEUCODUR	PU [pc.]	Ident-No.	Comp./ Inqu.
Dimensions entered are not listed? Please contact our application consulting . available from stock available on short notice Delivery time on request
	40	50	10	14	HL Solid 30	2	181637	\|
	50	50	10	14	HL Solid 30	2	181638	\|
	60	50	10	14	HL Solid 30	2	181639	\|
	70	50	10	14	HL Solid 30	2	181640	\|
	80	50	10	14	HL Solid 30	2	181641	\|
	100	50	10	14	HL Solid 30	2	182182	\|
	130	50	10	14	HL Solid 30	2	182183	\|
	150	50	10	14	HL Solid 30	2	182184	\|
	250	50	10	14	HL Solid 30	2	181642	\|
	40	60	10	24	HL Solid 30	2	181643	\|
	50	60	10	24	HL Solid 30	2	181644	\|
	60	60	10	24	HL Solid 30	2	181645	\|
	70	60	10	24	HL Solid 30	2	181646	\|
	80	60	10	24	HL Solid 30	2	181647	\|
	100	60	10	24	HL Solid 30	2	182322	\|
	130	60	10	24	HL Solid 30	2	182323	\|
	150	60	10	24	HL Solid 30	2	182324	\|
	250	60	10	24	HL Solid 30	2	181648	\|
	40	70	10	34	HL Solid 30	2	181649	\|
	50	70	10	34	HL Solid 30	2	181650	\|
	60	70	10	34	HL Solid 30	2	181651	\|
	70	70	10	34	HL Solid 30	2	181652	\|
	80	70	10	34	HL Solid 30	2	181653	\|
	250	70	10	34	HL Solid 30	2	181654	\|