Directly to the tool

Workpiece material




LEUCO product names


Selection via tool type

186114 - High-Performance Shank-Type Cutters CM DP Nesting - Z=2+2



  • Polycrystalline diamond [DP]
  • MEC

Comp./ Inqu. |

Technical data


Machine / Application

  • CNC routers
  • for panel sizing with Nesting Technology
  • for jointing, rabbeting and *grooving (*negative design)
  • particularly for processing MDF panels and Multiplex


  • with DP plunge tip
  • face cutting for diagonal plunge-cutting
  • Ø D=12 mm with highly stiff tool body
  • resharpening area 1.6 mm
  • n max = 24,000 min-1


  • high cutting quality and high-quality cutting edges on both sides thanks to specially adapted arrangement of cutting edges
  • positive spiral: optimum upward chip evacuation towards the dust extraction
  • negative spiral: downward chip evacuation and cutting pressure
  • negative spiral especially suitable for smaller or narrow workpieces and for grooving
  • Z=2+2 = bigger gullets for better chip removal (MDF) and for reducing heat generation, particularly when processing Multiplex


  • clamping elements: use in high-precision clamping elements recommended (e.g. TRIBOS, ps-System)
  • with thread for length adjusting screw
  • in case of higher feed rates and thicker boards choose the higher diameter
  • adapt the cutting length to the panel thickness (H)
  • * indicate "H" in case of Nesting with protection board
Feature Value
Ø D = Cutting circle diameter 16 [mm]
L4 = Cuttind width 1 4.5 [mm]
L2 = Cutting width 28 [mm]
Ø d = Shank diameter 16 [mm]
L3 = Shank length 45 [mm]
L1 = Total length 80 [mm]
Z = No. of teeth 2+2
Helical direction = Helical direction negative
nmax = maximum RPM 24,000 [min-1]
H = Wood thickness -25 [mm]
Resharpening area = Resharpening area 1.6 [mm]
L/R = cutting direction R
L = Delivery Status

Dimensions entered are not listed?
Please contact our application consulting .

available from stock
available on short notice
Delivery time on request