High-Performance Shank-Type Cutters CM DP Nesting - Z=2+2

high cutting quality and high-quality cutting edges on both sides thanks to specially adapted arrangement of cutting edges
positive spiral: optimum upward chip evacuation towards the dust extraction
negative spiral: downward chip evacuation and cutting pressure
negative spiral especially suitable for smaller or narrow workpieces and for grooving
Z=2+2 = bigger gullets for better chip removal (MDF) and for reducing heat generation, particularly when processing Multiplex

clamping elements: use in high-precision clamping elements recommended (e.g. TRIBOS, ps-System)
with thread for length adjusting screw
in case of higher feed rates and thicker boards choose the higher diameter
adapt the cutting length to the panel thickness (H)
* indicate "H" in case of Nesting with protection board

	Ø D [mm]	L4 [mm]	L2 [mm]	Ø d [mm]	L3 [mm]	L1 [mm]	Z	Helical direction	nmax [min-1]	H [mm]	Resharpening area [mm]	L/R	Ident-No.	Comp./ Inqu.
Dimensions entered are not listed? Please contact our application consulting . available from stock available on short notice Delivery time on request
	12		22	16	45	75	2+2	positive	24,000	16-19 *	1.6	R	187075	\|
	12	4.5	22	16	45	75	2+2	negative	24,000	-19	1.6	R	187076	\|
	16	4.5	28	16	45	80	2+2	negative	24,000	-25	1.6	R	187077	\|