Directly to the tool


Workpiece material

Machine

Applications

Features

LEUCO product names

Reset


Selection via tool type


Shank-Type Cutters DP for fischer® undercut anchors

Product

Drawing

  • Polycrystalline diamond [DP]
  • MEC

Article

Description

Machine / Application

  • CNC machining centers
  • for production of undercut bore holes for the fischer® undercut anchor type FZP II- (T) M6 (fischer Zykon panel anchors)
  • for facade materials made of mineral based materials, high-pressure laminate (HPL) or fiber cement boards (FC)

Design

  • high-strength tool body
  • special cutting edge geometry
  • cutting material: DP
  • LEUCO topline version
  • not resharpenable
  • n max = 24,000 min-1

Advantages

  • very long edgelife and thus considerably lower costs per hole compared to conventional solid carbide cutters
  • reduced coefficient of friction for lowest possible heat generation
  • high stiffness for excellent stability
  • optimum cutting quality thanks to special tooth geometry

Notes

  • Information regarding the application conditions (e.g. of floating milling aggregates), inspection and measuring tools, test instructions regarding the drilling holes and the safe fit of the anchors are available from ACT@fischer.de upon request
  • if the cutter is not used in a floating trimming unit but in a main spindle, the use of highly precise clamping devices such as the hydro expansion chuck "ps-System", the Power Shrink Chuck TRIBOS or the a heat-shrinking chuck is recommended

Table- and picture caption ...

Ø D
[mm]
L2
[mm]
Ø d
[mm]
L3
[mm]
L1
[mm]
Z nmax
[min-1]
Resharpening area
[mm]
L/R Ident-No. Comp./ Inqu.

Dimensions entered are not listed?
Please contact our application consulting .

available from stock
available on short notice

11.2 11 12 53 70 2 24,000 0 R 185869 
|

Downloads