UniTec Veneer Hoggers CM DP for LEUCO s-System Ø 160 mm and Bushing (RZ/DZ)
Product
Drawing
-
- Polycrystalline diamond [DP]
- MEC
Article
Description
Machine / Application
- double end tenoners
- for chip-free sizing of veneered panels
Design
- DP-tipped
- resharpening area 4 mm
- n max = 6,000 min-1
- HS insert sets Z=2+2 for hogging of excess veneer
Advantages
- improved chip evacuation integrated into the tool (ChipMeister)
- reduced cleaning efforts
- high cutting quality for veneered panels due to division of cut
- long edge lives thanks to optimized tooth form
- low power consumption
- safe hogging of excess veneer
- no formation of strips
- no clogging of the exhaustion
Notes
- machining of 8 mm boards is also possible
- for scoring/hogging (RZ) and double hogging (DZ) process
- sense of rotation according to VDMA 8849
|
Ø D
[mm] |
B
[mm] |
B1
[mm] |
b
[mm] |
Ø d
[mm] |
Z |
Feed DZ
[m/min] |
L/R | Ident-No. | Comp./ Inqu. | |
|---|---|---|---|---|---|---|---|---|---|---|
|
Dimensions entered are not listed?
available from stock |
||||||||||
| 250 | 34-31,5 | 10-7,6 | 23 | 60 | 48+24 | 60 | R | 187796 | ||
| 250 | 34-31,5 | 10-7,6 | 23 | 60 | 48+24 | 60 | L | 187797 | ||