UniTec Hoggers CM DP for LEUCO s-System Ø 160 mm and Bushing (RZ/DZ)
Article
Description
Machine / Application
- double end tenoners
- for chip-free sizing of raw, melamine-, paper-, HPL-laminated, foiled and veneered panels
Design
- Resharpening area: 5 mm
- n max=6,000 min-1
- division of cut in pre-cut and re-cut tooth
- constant cutting width
Advantages
- improved chip evacuation integrated into the tool (ChipMeister)
- reduced cleaning efforts
- reduced suction performance
- high quality of cut due to division of cut
- long edge lives thanks to optimized tooth form
Notes
- machining of 8 mm boards is also possible
- for scoring/hogging (RZ) and double hogging (DZ) process
- sense of rotation according to VDMA 8849
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z |
Feed DZ
[m/min] |
L/R | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||
250 | 8,0 | 18 | 60 | 24+12 | 30 | R | 187766 | ||
250 | 8,0 | 18 | 60 | 24+12 | 30 | L | 187771 | ||
250 | 8,0 | 18 | 60 | 36+18 | 45 | R | 187772 | ||
250 | 8,0 | 18 | 60 | 36+18 | 45 | L | 187774 | ||
250 | 8,0 | 18 | 60 | 48+24 | 60 | R | 187776 | ||
250 | 8,0 | 18 | 60 | 48+24 | 60 | L | 187778 | ||
250 | 8,0 | 18 | 60 | 54+27 | 70 | R | 187780 | ||
250 | 8,0 | 18 | 60 | 54+27 | 70 | L | 187782 | ||
250 | 16 | 18 | 60 | 36+18+6 | 45 | R | 187783 | ||
250 | 16 | 18 | 60 | 36+18+6 | 45 | L | 187785 | ||
250 | 16 | 18 | 60 | 48+24+6 | 60 | R | 187787 | ||
250 | 16 | 18 | 60 | 48+24+6 | 60 | L | 187788 |