Scoring Saw Blades DP "F-FA" - for hoggers
Product
Drawing
-
- Polycrystalline diamond [DP]
Article
Description
Machine / Application
- double end tenoners
- edge trimming machines
- for chip-free scoring of raw, melamine-, paper-, HPL-laminated, foiled and veneered panels
Design
- tooth configuration: flat with two-sided chamfer "F-FA"
- resharpenable area 4 mm
Advantages
- long edge lives
Notes
- application with feed
- the specified feed rates are based on n = 6,000 min-1
|
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z |
nmax
[min-1] |
Recommended feed
[m/min] |
Ident-No. | Comp./ Inqu. | |
|---|---|---|---|---|---|---|---|---|---|
|
Dimensions entered are not listed?
available from stock |
|||||||||
| 150 | 3,2 | 2.2 | 55 | 28 | 6,000 | 25 | 169322 | ||
| 180 | 3,2 | 2.2 | 30 | 48 | 6,000 | 50 | 169338 | ||
| 180 | 3,2 | 2.2 | 30 | 44 | 6,000 | 45 | 169335 | ||
| 180 | 3,2 | 2.2 | 30 | 40 | 6,000 | 40 | 169332 | ||
| 180 | 3,2 | 2.2 | 30 | 36 | 6,000 | 35 | 169329 | ||
| 180 | 3,2 | 2.2 | 30 | 32 | 6,000 | 30 | 169327 | ||
| 180 | 3,2 | 2.2 | 30 | 28 | 6,000 | 25 | 169326 | ||
| 180 | 3,2 | 2.2 | 30 | 24 | 6,000 | 20 | 169325 | ||
| 150 | 3,2 | 2.2 | 55 | 32 | 6,000 | 30 | 169323 | ||
| 150 | 3,2 | 2.2 | 55 | 24 | 6,000 | 20 | 169321 | ||
| 200 | 3,2 | 2.2 | 30 | 24 | 6,000 | 20 | 169341 | ||
| 150 | 3,2 | 2.2 | 60 | 36 | 6,000 | 35 | 170173 | ||
| 150 | 3,2 | 2.2 | 55 | 36 | 6,000 | 35 | 169324 | ||
| 150 | 3,2 | 2.2 | 60 | 28 | 6,000 | 25 | 170171 | ||
| 150 | 3,2 | 2.2 | 60 | 32 | 6,000 | 30 | 170172 | ||
| 200 | 3,2 | 2.2 | 30 | 28 | 6,000 | 25 | 169343 | ||
| 150 | 3,2 | 2.2 | 60 | 24 | 6,000 | 20 | 170170 | ||
| 200 | 3,2 | 2.2 | 30 | 48 | 6,000 | 50 | 169353 | ||
| 200 | 3,2 | 2.2 | 30 | 44 | 6,000 | 45 | 169351 | ||
| 200 | 3,2 | 2.2 | 30 | 40 | 6,000 | 40 | 169349 | ||
| 200 | 3,2 | 2.2 | 30 | 36 | 6,000 | 35 | 169347 | ||
| 200 | 3,2 | 2.2 | 30 | 32 | 6,000 | 30 | 169345 | ||