Bushings for Finger Joint Cutters
Article
Description
Machine / Application
- for clamping of finger joint cutters and edge finger joint cutters
Design
- high-tensile steel body
- spacers Ø 97 mm for cutters Ø 160-210 mm (not required)
Advantages
- high concentric and runout accuracy
- for varying wood thicknesses
Notes
- fill intermediate sizes with spacers
- for cutter Ø 250 mm install at least one spacer Ø 177 on top and bottom
- fastening nut or hydraulic clamping for cutter attachment must be ordered separately
- for cutter sets over 100 mm height we recommend hydraulic clamping
- the bushing length depends on the wood height "H" and on the type of nut
- accessories: mounting device, mounting ring and wrench is imperative for self-resharpening
L
[mm] |
Ø d
[mm] |
Ø D
[mm] |
L1
[mm] |
Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
||||||
90 | 50 | 70 | 57 | 178188 | ||
120 | 50 | 70 | 87 | 181035 | ||
130 | 50 | 70 | 97 | 178171 | ||
195 | 50 | 70 | 162 | 178172 | ||
220 | 50 | 70 | 187 | 178173 | ||
240 | 50 | 70 | 207 | 178174 |