189983 - Sizing Saw Blades HW "WS - profiles, ledges and plastic profiles
Product
Drawing
-
-
- Tungsten Carbide [HW]
-
Technical data
Description
Machine / Application
- chop and miter saws
- table saws
- for sizing and trimming cuts in wood-based panels
Design
- tooth configuration: alternate top bevel "WS"
- cutting material: HW HL Board 06
Advantages
- chip-free cutting without using a scoring aggregate thanks to 38 degree ATB
- noise-reduction thanks to laser ornaments
Notes
- for profiles, ledges and plastic profiles
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 300 [mm] | |
| B = Cutting width | 3,2 [mm] | |
| b = Body thickness | 2.2 [mm] | |
| Ø d = Bore diameter | 30 [mm] | |
| Z = No. of teeth | 96 | |
| NL = Pin holes | 2/7/42 + 2/9,5/46,5 + 2/10/60 | |
| Hook angle = Hook angle | 2 [°] | |
| Tooth geometry = Tooth configuration | WS | |
| LEUCODUR = Cutting material | HL Board 06 | |
| L = Delivery Status | ||
|
Dimensions entered are not listed?
available from stock |
||
