Sizing Saw Blades HW "TR-F" - hook angle 5°
Article
Description
Machine / Application
- table saws
- vertical panel sizing saws
- for sizing cuts in plastic-laminated panels
Design
- tooth configuration: triple chip / flat "TR-F"
- cutting material: HW HL Board 06
Advantages
- improved bottom edge (without scoring sawblade) thanks to 5 degree hook angle
- noise-reduction thanks to laser ornaments
Notes
- larger bore (max. Ø 50 mm) available for a surcharge
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z | NL |
Hook angle
[°] |
Tooth geometry | LEUCODUR | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||||
250 | 3,2 | 2.2 | 30 | 80 | 2/7/42 + 2/9,5/46,5 + 2/10/60 | 5 | TR-F | HL Board 06 | 189988 | ||
300 | 3,2 | 2.2 | 30 | 96 | 2/7/42 + 2/9,5/46,5 + 2/10/60 | 5 | TR-F | HL Board 06 | 189989 |