Directly to the tool


Workpiece material

Machine

Applications

Features

LEUCO product names

Reset


Selection via tool type


193162 - Panel Sizing Saw Blades HW - Q-Cut "G6"

Product

Drawing

  • Tungsten Carbide [HW]

Comp./ Inqu. |

Technical data

Description

Machine / Application

  • panel sizing saws
  • for finish cuts in veneered, foiled or melamine-laminated panels, in single sheets or in stacks

Design

  • vibration and noise damping ornaments
  • additional expansion slots
  • up to ØD=370, 10 degree hook angle
  • from ØD=380, 15 degree hook angle
  • tooth configuration: G6
  • cutting material: HW HL Board 04 plus

Advantages

  • for highest performance demands
  • impressive cutting quality thanks to exact and precise cuts
  • reduced cutting pressure and optimized cutting geometry G6
  • extremely low-noise and smooth running thanks to reinforced body and vibration and noise damping ornaments
  • clearly increased edge life thanks to improved HW grade

Notes

  • projection: min 20 - 25 mm
  • NL**- Combi3 = 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42
  • NL**- Combi5 = 2/7/110 + 2/9/110 + 2/8,4/130 + 2/14/110 + 4/9/100 + 4/19/120
  • NL**- Combi7 = 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120
Feature Value
Ø D = Cutting circle diameter 400 [mm]
B = Cutting width 4,4 [mm]
b = Body thickness 3.3 [mm]
Ø d = Bore diameter 60 [mm]
Z = No. of teeth 72
NL = Pin holes 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120
Hook angle = Hook angle 15 [°]
Tooth geometry = Tooth configuration G6
LEUCODUR = Cutting material HL Board 04 plus
L = Delivery Status
Machine/Type Nanxing

Dimensions entered are not listed?
Please contact our application consulting .

available from stock
available on short notice
Delivery time on request

suitable scoring saw blade

Product picture Description Design Ident-No. Comp./ Inqu.
Scoring Saw Blades HW "KO-F" - nn-System Ø180x4,45-5,25xØ30 Z=36 NL/DKN= 2/10/60 192700
|
Scoring Saw Blades HW "KO-HR" - nn-System Ø180x4,45-5,25xØ30 Z=30 NL/DKN= 2/10/60 192687
|
Scoring Saw Blades HW "KO-HR" - nn-System Ø180x4,45-5,25xØ45 Z=36 192689
|
Scoring Saw Blades HW "KO-WS" Ø180x4,45-5,25xØ20 Z=30 NL/DKN= 2/9/60 192732
|
Scoring Saw Blades HW "KO-WS" Ø180x4,45-5,25xØ45 Z=36 192734
|

available from stock
available on short notice
Delivery time on request

Downloads