NF-Thin-Kerf-Chop Saw Blades HW - positive hook angle "TR-F"
Product
Drawing
-
-
- Tungsten Carbide [HW]
-
Article
Description
Machine / Application
- chop saws
- for dividing and trimming of aluminum profiles (bars, tubes, ...)
Design
- with laser ornaments
- tooth configuration: triple chip / flat "TR-F"
- cutting material: HW HL Board 08
Advantages
- less vibration and noise thanks to laser ornaments
Notes
|
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z | NL |
Hook angle
[°] |
Tooth geometry | LEUCODUR | Machine/Type | Ident-No. | Comp./ Inqu. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Dimensions entered are not listed?
available from stock |
||||||||||||
| 285 | 2,0 | 1.6 | 32 | 60 | 4/9/50 + 4/11/63 | 5 | TR-F | HL Board 08 | Kasto Speed C9, Kasto WAC-70, Tsune, Nishijima, Rhobi, Everising, I.T.E.C |
189655 | ||
| 360 | 3,4 | 2.6 | 50 | 60 | 4/16/80 | 5 | TR-F | HL Board 08 | Kasto Speed C14/C15, Kasto Variospeed C14/C15, Kaltenbach KMR-100AP Tsune, Nishijima, Sinico, Endo |
189657 | ||
| 360 | 3,4 | 2.6 | 50 | 80 | 4/16/80 | 5 | TR-F | HL Board 08 | Kasto Speed C14/C15, Kasto Variospeed C14/C15, Kaltenbach KMR-100AP Tsune, Nishijima, Sinico, Endo | 189656 | ||
| 425 | 3,4 | 2.6 | 50 | 50 | 4/16/80 | 5 | TR-F | HL Board 08 | Kasto Speed C14/C15, Kasto Variospeed C14/C15 |
189658 | ||
| 425 | 3,4 | 2.6 | 50 | 60 | 4/16/80 | 5 | TR-F | HL Board 08 | Kasto Speed C14/C15, Kasto Variospeed C14/C15 |
189659 | ||
| 460 | 3,4 | 2.6 | 50 | 50 | 4/16/80 | 8 | TR-F | HL Board 08 | Kasto Speed C14/C15, Kasto Variospeed C14/C15, Everising, Noritake |
189660 | ||
| 460 | 3,4 | 2.6 | 50 | 60 | 4/16/80 | 8 | TR-F | HL Board 08 | Kasto Speed C14/C15, Kasto Variospeed C14/C15, Everising, Noritake |
189662 | ||
| 460 | 3,4 | 2.6 | 50 | 80 | 4/16/80 | 8 | TR-F | HL Board 08 | Kasto Speed C14/C15, Kasto Variospeed C14/C15, Everising, Noritake |
189661 | ||