DIAREX NF-Chop Saw Blades DP - Profile "TR-F"
Product
Drawing
-
-
- Polycrystalline diamond [DP]
-
Article
Description
Machine / Application
- chop and miter saws
- for clipping and mitre cuts in aluminum profiles
Design
- neutral hook angle
- tooth configuration: triple chip / flat "TR-F"
Advantages
- excellent burr-free cuts with low roughness thanks to special laser ornaments and tooth partition
Notes
- tight workpiece clamping required
|
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z | NL |
Hook angle
[°] |
Tooth geometry | Machine/Type | Ident-No. | Comp./ Inqu. | |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
Dimensions entered are not listed?
available from stock |
|||||||||||
| 275 | 3,4 | 2.8 | 32 | 60 | 4/9/50 | 0 | TR-F | Wagner 1994 | 189868 | ||
| 285 | 3,4 | 2.8 | 32 | 60 | 4/9/50 | 0 | TR-F | Wagner | 189869 | ||
| 380 | 3,6 | 3 | 32 | 84 | 4/9/50 | 0 | TR-F | Elumatec | 189870 | ||
| 400 | 3,8 | 3.2 | 40 | 90 | 2/12/80 | 0 | TR-F | Eisele VA-L 350 NC1 | 189871 | ||
| 500 | 4,0 | 3.4 | 30 | 114 | 2/10/70 | 0 | TR-F | Elumatec | 189872 | ||
| 550 | 4,2 | 3.6 | 30 | 120 | 0 | TR-F | Elumatec MGS | 189873 | |||