Pre-Cut Gang-Rip Saw Blades HW with HW-rakers "F" - EWD
Article
Description
Machine / Application
- primary machines with and without chippers
- for longitudinal cuts in wet and dry soft woods
Design
- tooth configuration: flat "F"
- cutting material: HW HL Board 20
- type A and C with staggered double keyways
Advantages
- extremely high bending strength and hardness of the teeth
- tungsten carbide rakers prevent the sides of the wood from making contact with the steel plate
- staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine
Notes
- the saw blade is optimized according to the LEUCO company standards as well as according to the customers specifications and machine parameters after consultation with the technical engineering
- Ident-No. is only for orientation
Ø D
[mm] |
B
[mm] |
b
[mm] |
b1
[mm] |
Ø D1
[mm] |
Ø d
[mm] |
Z |
Number of rakers
[pc.] |
DKN
[mm] |
NL |
Hook angle
[°] |
L/R | Tooth geometry | LEUCODUR | Machine/Type | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||||||||||
560 | 4,8 | 3.2 | 7 | 220 | 150 | 32 | 6 | 6/10,25/175 | 22 | L | HL Board 20 | EWD FR 15 | 80291675 | ||||
560 | 4,8 | 3.2 | 7 | 220 | 150 | 32 | 6 | 6/10,25/175 | 22 | R | HL Board 20 | EWD FR 15 | 80291674 | ||||
565 | 5,2 | 3.4 | 7 | 205 | 160 | 42 | 6 | 22,2x5,4 | 6/11/182,5 + 12/8,5/182,5 | 22 | L | HL Board 20 | EWD DWK | 80297832 | |||
565 | 5,2 | 3.4 | 7 | 205 | 160 | 42 | 6 | 22,2x5,4 | 6/11/182,5 + 12/8,5/182,5 | 22 | R | HL Board 20 | EWD DWK | 80297833 | |||
580 | 4,1 | 2.8 | 5.5 | 300 | 160 | 32 | 6 | 23x6 | 6/12/182,5 | 22 | L | HL Board 20 | EWD DWK | 80309039 | |||
580 | 4,1 | 2.8 | 5.5 | 300 | 160 | 32 | 6 | 23x6 | 6/12/182,5 | 22 | R | HL Board 20 | EWD DWK | 80309038 | |||
590 | 5,2 | 3.4 | 7.2 | 205 | 160 | 22 | 6 | 23x6 | 6/11/182,5 + 6/8,5/182,5 | 25 | L | HL Board 20 | EWD FR 22 | 80309372 | |||
590 | 5,2 | 3.4 | 7.2 | 205 | 160 | 22 | 6 | 23x6 | 6/11/182,5 + 6/8,5/182,5 | 25 | R | HL Board 20 | EWD FR 22 | 80309371 | |||
600 | 5,0 | 3.4 | 6 | 240 | 145 | 36 | 6 | 20x9,5 | 6/16/208 + 6/16/180 | 22 | L | HL Board 20 | EWD VNK 300 | 80290174 | |||
600 | 5,0 | 3.4 | 6 | 240 | 145 | 36 | 6 | 20x9,5 | 6/16/208 + 6/16/180 | 22 | R | HL Board 20 | EWD VNK 300 | 80290175 | |||
610 | 5,0 | 3.2 | 6 | 240 | 145 | 36 | 6 | 20x9,5 | 6/16/208 + 6/16/180 | 22 | L | HL Board 20 | EWD VNK 300 | 80306576 | |||
610 | 5,0 | 3.2 | 6 | 240 | 145 | 36 | 6 | 20x9,5 | 6/16/208 + 6/16/180 | 22 | R | HL Board 20 | EWD VNK 300 | 80306587 | |||
630 | 5,4 | 3.8 | 7 | 200 | 150 | 24 | 6 | 37x4 | 8/8,5/175 + 2/10,2/175 | 25 | L | HL Board 20 | EWD FR 16 | 80143865 | |||
630 | 5,4 | 3.8 | 7 | 200 | 150 | 24 | 6 | 37x4 | 8/8,5/175 + 2/10,2/175 | 25 | R | HL Board 20 | EWD FR 16 | 80143864 | |||
630 | 5,4 | 3.8 | 7 | 200 | 150 | 36 | 6 | 36,5x4 | 8/8,5/175 | 22 | L | HL Board 20 | EWD FR 16 | 80359234 | |||
630 | 5,4 | 3.8 | 7 | 200 | 150 | 36 | 6 | 36,5x4 | 8/8,5/175 | 22 | R | HL Board 20 | EWD FR 16 | 80359233 | |||
630 | 5,2 | 3.6 | 4.5 | 200 | 150 | 28 | 8 | 36,5x4 | 25 | L | HL Board 20 | EWD FR 16 | 80300918 | ||||
630 | 5,2 | 3.6 | 4.5 | 200 | 150 | 28 | 8 | 36,5x4 | 25 | R | HL Board 20 | EWD FR 16 | 80300915 | ||||
640 | 5,6 | 3.8 | 7 | 205 | 160 | 28 | 6 | 23x6 | 6/11/182,5 + 12/8,5/182,5 | 22 | L | HL Board 20 | EWD DWK | 80289037 | |||
640 | 5,6 | 3.8 | 7 | 205 | 160 | 28 | 6 | 23x6 | 6/11/182,5 + 12/8,5/182,5 | 22 | R | HL Board 20 | EWD DWK | 80289036 | |||
700 | 5,2 | 3.8 | 6 | 190 | 125 | 32 | 6 | 8/16/160 + 4/18/165 | 22 | L | F | HL Board 20 | EWD BNK 6 | 80278892 | |||
700 | 5,2 | 3.8 | 6 | 190 | 125 | 32 | 6 | 8/16/160 + 4/18/165 | 22 | R | HL Board 20 | EWD BNK 6 | 80278891 |