Pre-Cut Gang-Rip Saw Blades HW with HW-rakers "F" - Möhringer
Article
Description
Machine / Application
- primary machines with and without chippers
- for longitudinal cuts in wet and dry soft woods
Design
- tooth configuration: flat "F"
- cutting material: HW HL Board 20
- type A and C with staggered double keyways
Advantages
- extremely high bending strength and hardness of the teeth
- tungsten carbide rakers prevent the sides of the wood from making contact with the steel plate
- staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine
Notes
- the saw blade is optimized according to the LEUCO company standards as well as according to the customers specifications and machine parameters after consultation with the technical engineering
- Ident-No. is only for orientation
Ø D
[mm] |
B
[mm] |
b
[mm] |
b1
[mm] |
Ø D1
[mm] |
Ø d
[mm] |
Z |
Number of rakers
[pc.] |
NL |
Hook angle
[°] |
L/R | LEUCODUR | Machine/Type | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||||||||
595 | 5,2 | 3.6 | 6.8 | 190 | 105 | 20 | 6 | 8/13/156 | 20 | L | HL Board 20 | Möhringer | 80293989 | ||
595 | 5,2 | 3.6 | 6.8 | 190 | 105 | 20 | 6 | 8/13/156 | 20 | R | HL Board 20 | Möhringer | 80293990 |