Gang-Rip Saw Blades HW with internal HW-rakers - solid "WS"
Article
Description
Machine / Application
- table saws
- climb-cutting rip saws
- suitable for manual feed
- for ripping and cross cuts in wet and dry solid woods
Design
- tooth configuration: alternate top bevel "WS"
- cutting material: HW HL Board 20
- 4 internal spurs HW
Advantages
- tungsten carbide rakers prevent the sides of the wood from making contact with the steel plate
- chip limiter design for universal application
Notes
- for inquiries / orders enclose specification sheet (see appendix)
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Ø dmax
[mm] |
Max. flange Ø
[mm] |
Z |
Number of rakers
[pc.] |
NL |
Hook angle
[°] |
Corner∡
[°] |
Tooth geometry | LEUCODUR | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
|||||||||||||||
350 | 3,5 | 2.5 | 30 | 70 | 140 | 24 | 2+2 | 2/7/42 + 2/9,5/46,5 + 2/10/60 | 20 | 10 | WS | HL Board 20 | 189643 | ||
400 | 3,5 | 2.5 | 30 | 80 | 160 | 28 | 2+2 | 2/7/42 + 2/9,5/46,5 + 2/10/60 | 20 | 10 | WS | HL Board 20 | 189644 | ||
450 | 4,2 | 2.8 | 30 | 80 | 160 | 36 | 2+2 | 2/7/42 + 2/9,5/46,5 + 2/10/60 | 20 | 10 | WS | HL Board 20 | 189645 |