Directly to the tool


Workpiece material

Machine

Applications

Features

LEUCO product names

Reset


Selection via tool type


Gang-Rip Saw Blades HW "F"

Product

Drawing

  • Tungsten Carbide [HW]

Article

Description

Machine / Application

  • molders
  • gang-rip saws with one or two shafts
  • for precise ripping cuts in dry and planed soft woods

Design

  • tooth configuration: flat "F"
  • cutting material: HW HL Board 20
  • type A and C with staggered double keyways

Advantages

  • staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine

Notes

  • larger bore (max. Ø 100 mm) available for a surcharge
  • for cutting height > 50 mm use version with HW rakers
  • for inquiries / orders enclose specification sheet (see appendix)

Table- and picture caption ...

Ø D
[mm]
B
[mm]
b
[mm]
Ø d
[mm]
Ø dmax
[mm]
Z DKN
[mm]
NL Hook angle
[°]
Tooth geometry LEUCODUR Ident-No. Comp./ Inqu.

Dimensions entered are not listed?
Please contact our application consulting .

available from stock
available on short notice
Delivery time on request

200 2,0 1.4 40 100 20 20 F HL Board 20 188029 
|
200 2,4 1.6 40 100 20 20 F HL Board 20 188148 
|
225 2,4 1.6 40 100 20 20 F HL Board 20 188150 
|
250 2,4 1.6 40 100 24 20 F HL Board 20 188151 
|
250 3,2 2.2 70 100 20 20x5 20 F HL Board 20 189300 
|
250 2,8 1.8 70 100 24 20x5 20 F HL Board 20 188030 
|
300 3,2 2.2 70 100 24 20x5 20 F HL Board 20 189301 
|
300 3,2 2.2 80 100 24 18,5x5 6/5,5/91 + 4/6,6/95 + 2/13/100 20 F HL Board 20 189302 
|
350 3,5 2.5 70 100 28 20x5 20 F HL Board 20 189303 
|
350 3,5 2.5 80 100 28 18,5x5 6/5,5/91 + 4/6,6/95 + 2/13/100 20 F HL Board 20 188027 
|