Re-Cut Gang-Rip Saw Blades HW with HW-rakers "F" - EWD
Product
Drawing
-
-
- Tungsten Carbide [HW]
Article
Description
Machine / Application
- multi-blade machines with or without chipper
- for longitudinal cuts in wet and dry soft woods
Design
- tooth configuration: flat "F"
- cutting material: HW HL Board 20
- type A and C with staggered double keyways
Advantages
- extremely high bending strength and hardness of the teeth
- tungsten carbide rakers prevent the sides of the wood from making contact with the steel plate
- staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine
Notes
- the saw blade is optimized according to the LEUCO company standards as well as according to the customers specifications and machine parameters after consultation with the technical engineering
- Ident-No. is only for orientation
|
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z |
Number of rakers
[pc.] |
DKN
[mm] |
Hook angle
[°] |
Tooth geometry | LEUCODUR | Machine/Type | Ident-No. | Comp./ Inqu. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Dimensions entered are not listed?
available from stock |
|||||||||||||
| 450 | 3,8 | 2.5 | 110 | 24 | 4 | 17x8 | 22 | F | HL Board 20 | EWD FR | 80264025 | ||
| 450 | 4,2 | 2.7 | 150 | 36 | 4 | 37x7 | 20 | F | HL Board 20 | EWD | 80225333 | ||
| 500 | 4,4 | 3 | 150 | 24 | 4 | 37x7 | 25 | F | HL Board 20 | EWD FR12 | 80236978 | ||
| 520 | 4,9 | 3.4 | 150 | 24 | 6 | 36,5x4 | 22 | F | HL Board 20 | EWD FR12 | 80291680 | ||
| 520 | 4,9 | 3.4 | 150 | 48 | 6 | 36,5x4 | 22 | F | HL Board 20 | EWD FR12 | 80291939 | ||
| 520 | 4,9 | 3.4 | 150 | 32 | 6 | 36,5x4 | 22 | F | HL Board 20 | EWD FR12 | 80308059 | ||