Directly to the tool

Tool finder

Workpiece material

Machine

Applications

Features

Cutting circle diameter

Cutting circle diameter (inch)

Cutting width

Bore diameter

Bore diameter (inch)

No. of teeth

Tooth configuration

Cutting material group

LEUCO product names

To the product names

Articles found: 18

Your can restrict your selection by using the other filters!

Reset

Selection via tool type

Double Clipping Saw Blades HW with cooling slots "WSA"

Product

Drawing

  • Tungsten Carbide [HW]

Article

Description

Machine / Application

  • joinery machines
  • double clipping saws
  • table saws
  • for chop cuts (one-sided, double-sided) for precise lengths of boards, lamellas, etc.

Design

  • positive hook angle
  • proven asymmetric chip evacuation gap geometry and additional cooling elements
  • tooth configuration: alternate top bevel with shear angle "WSA"
  • cutting material: HW HL Board 10
  • extremely high bending strength and hardness of the teeth

Advantages

  • reduced cutting pressure thanks to alternating shear angle
  • long edge lives provide for the necessary productivity and economic efficiency

Notes

Table- and picture caption ...

Ø D
[mm] 		B
[mm] 		b
[mm] 		Ø d
[mm] 		Z DKN
[mm] 		NL Hook angle
[°] 		Corner∡
[°] 		Shear∡
[°] 		Tooth geometry LEUCODUR Machine/Type Ident-No. Comp./ Inqu.

Dimensions entered are not listed?
Please contact our application consulting .

available from stock
available on short notice
Delivery time on request

350 4,0 2.6 30 54 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 15 20 5 WSA HL Board 10 189788 
|
400 4,4 3 30 60 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 15 20 5 WSA HL Board 10 189789 
|
450 4,4 3 30 72 2/10/60 + 2/9/46 + 2/9,5/46,5 + 2/7/42 15 20 5 WSA HL Board 10 189790 
|
500 4,8 3.2 30 72 2/10/80 15 20 5 WSA HL Board 10 189792 
|
500 4,8 3.2 30 108 2/10/80 + 2/15/63 15 20 5 WSA HL Board 10 189794 
|
500 4,0 3.2 70 108 20x6 15 20 5 WSA HL Board 10 192954 
|
550 4,8 3.2 30 72 2/10/80 15 20 5 WSA HL Board 10 189795 
|
630 5,4 4 40 72 2/10/60 15 20 5 WSA HL Board 10 189797 
|
650 5,6 4 30 96 2/10/80 + 2/15/63 + 2/14/100 15 20 5 WSA HL Board 10 189798 
|
650 5,6 4 30 54 2/10/80 + 2/15/63 15 20 5 WSA HL Board 10 189799 
|
720 6,2 4.4 30 48 2/8,5/90 15 20 5 WSA HL Board 10 Hundegger 189800 
|
720 6,2 4.4 30 72 2/8,5/90 15 20 5 WSA HL Board 10 Hundegger 189801 
|
735 6,2 4.4 30 48 2/8,5/90 15 20 5 WSA HL Board 10 Hundegger 189802 
|
735 6,2 4.4 30 72 2/8,5/90 15 20 5 WSA HL Board 10 Hundegger 189803 
|
760 6,2 4.4 30 48 2/14/400 + 4/8,5/90 15 20 5 WSA HL Board 10 Hundegger 189804 
|
760 6,2 4.4 30 72 2/14/400 + 4/8,5/90 15 20 5 WSA HL Board 10 Hundegger 189805 
|
760 6,2 4.4 30 96 2/14/400 + 4/8,5/90 15 20 5 WSA HL Board 10 Hundegger 189806 
|
800 6,2 4.4 30 48 15 20 5 WSA HL Board 10 Paul 189807 
|