Clipping Saw Blades HW for edge trimming "ES" - nn-System, with countersink
Product
Drawing
-
-
- Tungsten Carbide [HW]
-
Article
Description
Machine / Application
- edge banders
- edge trimming machines
- for trimming of thin plastic-, veneer- and solid wood edges
Design
- special NoNoise gullet geometry
- positive or negative hook angle
- with and without shear angle
- pin holes with countersink
- tooth configuration: top bevel "ES (right + left)"
- cutting material: HW HL Board 06
Advantages
- especially low noise level
- noise reduction by approx. 6 dB(A) when idling
Notes
- sense of rotation see drawing
|
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z | NL |
Hook angle
[°] |
Corner∡
[°] |
L/R |
Shear∡
[°] |
Tooth geometry | LEUCODUR | Machine/Type | Ident-No. | Comp./ Inqu. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Dimensions entered are not listed?
available from stock |
|||||||||||||||
| 110 | 3,2 | 2.5 | 40 | 20 | 4/6/52 | -6 | 45 | L | 5 | ES | HL Board 06 | Homag | 192515 | ||
| 110 | 3,2 | 2.5 | 40 | 20 | 4/6/52 | -6 | 45 | R | 5 | ES | HL Board 06 | Homag | 192516 | ||
| 120 | 3,2 | 2.5 | 40 | 20 | 4/6/52 | -6 | 45 | L | 5 | ES | HL Board 06 | Homag | 192517 | ||
| 120 | 3,2 | 2.5 | 40 | 20 | 4/6/52 | -6 | 45 | R | 5 | ES | HL Board 06 | Homag | 192518 | ||
| 130 | 3,6 | 2.8 | 30 | 20+4 | 4/7,4/46 | 10 | 30 | L | 0 | ES | HL Board 06 | Biesse | 192530 | ||
| 130 | 3,6 | 2.8 | 30 | 20+4 | 4/7,4/46 | 10 | 30 | R | 0 | ES | HL Board 06 | Biesse | 192529 | ||
| 140 | 3,6 | 2.8 | 30 | 20+2 | 4/7,4/46 | -20 | 30 | L | 0 | ES | HL Board 06 | Biesse | 192532 | ||
| 140 | 3,6 | 2.8 | 30 | 20+2 | 4/7,4/46 | -20 | 30 | R | 0 | ES | HL Board 06 | Biesse | 192531 | ||
| 150 | 3,8 | 2.5 | 35 | 24+6 | 4/6/50 | 10 | 15 | L | 0 | ES | HL Board 06 | SCM-Stefani | 192534 | ||
| 150 | 3,8 | 2.5 | 35 | 24+6 | 4/6/50 | 10 | 15 | R | 0 | ES | HL Board 06 | SCM-Stefani | 192533 | ||