Directly to the tool

Tool finder

Workpiece material

Machine

Applications

Features

Cutting circle diameter

Cutting circle diameter (inch)

Cutting width

Bore diameter

Bore diameter (inch)

No. of teeth

Tooth configuration

Cutting material group

LEUCO product names

To the product names

Articles found: 7

Your can restrict your selection by using the other filters!

Reset

Selection via tool type

Clipping Saw Blades HW for wood optimization "WSA"

Product

Drawing

  • Tungsten Carbide [HW]

Article

Description

Machine / Application

  • optimizing chop saws
  • undertable cross-cut saws
  • push-feed saws
  • through-feed saws
  • for cross cuts in solid woods

Design

  • positive hook angle
  • tooth configuration: alternate top bevel with shear angle "WSA"
  • cutting material: HW HL Board 06
  • extremely high bending strength and hardness of the teeth

Advantages

  • reduced cutting pressure thanks to alternating shear angle
  • long edge lives provide for the necessary productivity and economic efficiency

Notes

Table- and picture caption ...

Ø D
[mm] 		B
[mm] 		b
[mm] 		Ø d
[mm] 		Z NL Hook angle
[°] 		Corner∡
[°] 		Shear∡
[°] 		Tooth geometry Cutting quality* LEUCODUR Machine/Type Ident-No. Comp./ Inqu.

Dimensions entered are not listed?
Please contact our application consulting .

available from stock
available on short notice
Delivery time on request

400 3,4 2.8 30 120 2/10/60 2 40 5 WSA HL Board 06 DIMTER QUANTUM 189896 
|
400 4,6 3.5 30 120 2/10/60 2 40 5 WSA ▲▲▲ HL Board 06 DIMTER 189833 
|
450 4,6 3.5 30 132 2/15/63 2 40 5 WSA ▲▲▲ HL Board 06 DIMTER 189834 
|
500 4,6 3.5 30 144 2/15/63 2 40 5 WSA HL Board 06 DIMTER 189835 
|
520 4,6 3.5 30 144 2/15/63 2 40 5 WSA HL Board 06 189836 
|
600 5,2 3.8 30 172 2/15/63 2 40 5 WSA HL Board 06 DIMTER 189838 
|
630 5,4 4 30 180 2/15/63 2 40 5 WSA HL Board 06 189839 
|