Porte-outils HW à arrondir les chants - IMA
Article
Description
Machine / Application
- Plaqueuses de chants IMA
- Pour arrondir les alaises de chants en bois massifs, placages et matières plastiques
Exécution
- Coupe sans coupe biaise
- Matériau de coupe: HW HL Board 05
- n max = 18.000 t/min
Avantages
- Corps de porte-outils identique pour rayon 1 - 5 mm et chanfrein
Renseignements
- Sens de rotation: voir croquis
R
[mm] |
Ø D
[mm] |
Ø D1
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z |
DKN
[mm] |
nmax
[t/min] |
G/D | Ident-No. | Compar. | demande | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Les dimensions recherchées ne sont pas proposées ?
livrable de stock |
||||||||||||
3,0 | 82 | 70 | 16 | 13 | 20 | 4 | 6x3,5 | 18 000 | G | 168353 | ||
3,0 | 82 | 70 | 16 | 13 | 20 | 4 | 6x3,5 | 18 000 | D | 168354 | ||
2,0 | 82 | 70 | 16 | 13 | 20 | 4 | 6x3,5 | 18 000 | G | 168373 | ||
2,0 | 82 | 70 | 16 | 13 | 20 | 4 | 6x3,5 | 18 000 | D | 168374 | ||
4,0 | 82 | 70 | 16 | 13 | 20 | 4 | 6x3,5 | 18 000 | G | 168375 | ||
4,0 | 82 | 70 | 16 | 13 | 20 | 4 | 6x3,5 | 18 000 | D | 168376 | ||
5,0 | 82 | 70 | 16 | 13 | 20 | 4 | 6x3,5 | 18 000 | G | 168377 | ||
5,0 | 82 | 70 | 16 | 13 | 20 | 4 | 6x3,5 | 18 000 | D | 168378 |