News

Dividing laminated panels in best quality is the strength of the carbide-tipped Q-Cut G6 from LEUCO. This saw blade now achieves longer edge lives. The Q-Cut G6 is part of the Q-Cut family. What they have in common is the finish-cut quality.

Q-Cut G6 is a standard tool for horizontal panel sizing saws. The strengths of this saw blade become particularly apparent when laminated composite wood boards have to be divided. Individual panels or stacks up to a cutting height of 80 mm can be processed in perfect cutting quality. Q-Cut G6 now achieves longer edge lives than before. The improvement could be achieved by an optimization of the particularly smooth tooth geometry and the use of a special tungsten carbide for the cutting edges. The implementation of these two measures results in the longest edge life of this saw blade LEUCO could ever reach with tungsten carbide tips for composite wood boards and this in perfect cutting quality.

High quality and low noise

One factor for the high quality of the panels processed with the Q-Cut G6 is the stiff tool body. This results in a smooth and low-vibration running and therefore in an increased accuracy during the sawing process. In addition, the saw blade is resistant to breakage and shocks caused by foreign objects.

LEUCO has not only redesigned the standard saw blade but also the variant Q-Cut G6 nn-System. The abbreviation "nn" stands for "no noise". The standard version is already silent thanks to its low-vibration tool body ("low noise"). Due to the smaller gullets, the noise level of the Q-Cut G6 nn-System when idling is even lower. The air turbulences generated by the tool are reduced which leads to a lower noise level.

Finish-cut quality for any task

The product family Q-Cut consists of four saw blade types which are characterized by their high cutting quality on horizontal panel sizing saws. All these blades are equipped with a low-vibration tool body. The tool configuration differs according to the material to be processed.

The Q-Cut G6 is the saw blade most used in this family. For many carpenter's shops and furniture manufacturers, it is a standard tool for the sizing of laminated panels. It is available in the diameters 280 to 520 mm. Its tooth group configuration G6 with two leading teeth with an increased cutting performance and four following teeth is designed for long edge lives. The Q-Cut G6 nn-System generates only a low noise level with similar processing results.

The Q-Cut G5 is provided with a tooth group configuration consisting of a leading tooth and four following teeth. This tooth configuration is used for finish-cut quality in plywood, veneered wood-based materials, panels with sensitive top layers as well as lightweight panels. The saw blade Q-Cut K is a special tool for anti-fingerprint and plastic panels.

Tool Program

• Q-Cut G6 und Q-Cut G6 nn-System
  
• Q-Cut G5
• Q-Cut K