p-System High-Performance Shank-Type Cutters CM DP - Weeke BHX 050/055

WEEKE BHX 050 and BHX 055 with delivery date as from Sept. 01, 2015
BHX 50/055 machines with CNC controlled clamping devices (servo) and with delivery date as from 01.01.2014 only can be updated by the manufacturer (Note: Service charges will occur)
for chip-free high-performance jointing and dividing of solid woods (free of knots) along and accross the grain
for jointing and dividing of melamine-, paper-, HPL-laminated, foiled and veneered panels and lacquered surfaces
Finish-quality in the case of fiber materials such as fabric-laminated panels, linoleum with jute fibers, cork etc.

Tools with plunge tip (L4) must project at least 4,5 mm on bottom side of workpiece in order to bring p-System cutting edges into action. D 30 is without plunge tip
for ramping or circular plungeing only
recommended feed rate per tooth: wood-based panels 0.3 - 0.35 mm, solid wood 0.15 - 0.2 mm
clamping element: precision clamping element e.g. ps-System, TRIBOS
with thread for length adjusting screw
sense of rotation according to VDMA 8849

	Ø D [mm]	L4 [mm]	L2 [mm]	Ø d [mm]	L3 [mm]	L1 [mm]	Z	nmax [min-1]	Shear∡ [°]	Resharpening area [mm]	L/R	Ident-No.	Comp./ Inqu.
Dimensions entered are not listed? Please contact our application consulting . available from stock available on short notice Delivery time on request
	20	4	25,1	25	51	105	1+1	24,000	70	2.5	R	185664	\|
	25	4	25,7	25	53	105	2+2+1	24,000	70	2.5	R	185663	\|
	25	4	30	25	53	110	2+2+1	24,000	70	2.5	R	185823	\|
	25	4	47,2	25	53	125	2+2+1	24,000	70	2.5	R	185824	\|