Roughing / Finishing Cutter VHW "NF"
Product
Drawing
-
- Solid Tungsten Carbide
- MEC
Article
Description
Machine / Application
- CNC routers
- for sizing and grooving particularly in soft and hard woods, glued woods, Multiplex, plywood and many wood-based panels
- for cutting of cut-outs and contours
- traveling plunge cut using Z and X or Y axis
Design
- NF serration
- Z=3 for high cutting performance
- positive spiral for tightly clamped workpieces face side down
- negative spiral for workpiece support with face side up
- n max = 30,000 min-1
Advantages
- cutting surfaces almost in finishing quality
- reduced effort thanks to division of cut
- smooth running
Notes
- clamping elements:we recommend hydro expansion chuck ps-System, TRIBOS or heat shrink-fit chuck
|
Ø D
[mm] |
L2
[mm] |
Ø d
[mm] |
L3
[mm] |
L1
[mm] |
Z | Helical direction | L/R | Ident-No. | Comp./ Inqu. | |
|---|---|---|---|---|---|---|---|---|---|---|
|
Dimensions entered are not listed?
available from stock |
||||||||||
| 12 | 35 | 12 | 40 | 80 | 3 | positive | R | 185527 | ||
| 12 | 35 | 12 | 40 | 100 | 3 | negative | R | 185528 | ||
| 12 | 35 | 12 | 40 | 100 | 3 | negative | L | 185529 | ||
| 12 | 42 | 12 | 45 | 90 | 3 | positive | R | 185530 | ||
| 14 | 42 | 14 | 50 | 100 | 3 | positive | R | 185531 | ||
| 16 | 52 | 16 | 55 | 110 | 3 | positive | R | 185532 | ||
| 16 | 52 | 16 | 55 | 110 | 3 | positive | L | 185533 | ||
| 18 | 60 | 18 | 55 | 115 | 3 | positive | R | 185534 | ||
| 20 | 60 | 20 | 55 | 120 | 3 | positive | R | 185535 | ||
| 20 | 60 | 20 | 55 | 120 | 3 | positive | L | 185536 | ||
| 20 | 75 | 20 | 50 | 130 | 3 | positive | R | 185537 | ||
| 20 | 75 | 20 | 50 | 130 | 3 | positive | L | 185538 | ||