DIAMAX Shank-Type Cutters DP - Z=1
Product
Drawing
-
-
- Polycrystalline diamond [DP]
- MEC
Article
Description
Machine / Application
- CNC routers
- for jointing without overlap marks in solid woods and wood-based panels
- not suitable for dividing and deep grooves
- for light millwork only
Design
- polished face and high-finish clearance angle
- with HW plunge tip for diagonal plunge-cutting (travelling plunge-cut using Z and X axis)
- straight cutter axis
- resharpening area 0.8 mm
Advantages
- high quality machining of MDF and hard woods
- no overlap-marks thanks to continuous cutting edge
Notes
- Clamping elements: ps-System, TRIBOS, draw-in collet chuck
- with thread for length adjusting screw
|
Ø D
[mm] |
L2
[mm] |
Ø d
[mm] |
L3
[mm] |
L1
[mm] |
Z |
nmax
[min-1] |
Resharpening area
[mm] |
L/R | Ident-No. | Comp./ Inqu. | |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
Dimensions entered are not listed?
available from stock |
|||||||||||
| 8 | 22 | 8 | 35 | 65 | 1+1 | 24,000 | 0.8 | R | 187842 | ||
| 8 | 22 | 12 | 35 | 65 | 1+1 | 24,000 | 0.8 | R | 182664 | ||