Shank-Type Cutters DP for fischer® undercut anchors

CNC machining centers
187246 especially for copy wheels aggregates Homag Nr. 2-017-95-7130 / BENZ Nr. 000WTA04205G00S3
for production of undercut bore holes for the fischer® undercut anchor type FZP II- (T) M6 (fischer Zykon panel anchors)
for facade materials made of mineral based materials, high-pressure laminate (HPL) or fiber cement boards (FC)

very long edgelife and thus considerably lower costs per hole compared to conventional solid carbide cutters
reduced coefficient of friction for lowest possible heat generation
high stiffness for excellent stability
optimum cutting quality thanks to special tooth geometry

Information regarding the application conditions (e.g. of floating milling aggregates), inspection and measuring tools, test instructions regarding the drilling holes and the safe fit of the anchors are available from ACT@fischer.de upon request
if the cutter is not used in a floating trimming unit but in a main spindle, the use of highly precise clamping devices such as the hydro expansion chuck "ps-System", the Power Shrink Chuck TRIBOS or the a heat-shrinking chuck is recommended

	Ø D [mm]	L2 [mm]	Ø d [mm]	L3 [mm]	L1 [mm]	Z	nmax [min-1]	Resharpening area [mm]	L/R	Machine/Type	Ident-No.	Comp./ Inqu.
Dimensions entered are not listed? Please contact our application consulting . available from stock available on short notice Delivery time on request
	11.2	11	12	41.9	57	2	24,000	0	R	Homag Nr. 2-017-95-7130 / BENZ Nr. 000WTA04205G00S3	187246	\|
	11.2	11	12	53	70	2	24,000	0	R		185869	\|