189539 - Scoring Saw Blades HW "WS" - for finger joint machines
Technical data
Description
Machine / Application
- finger jointing lines Grecon
- for scoring of solid woods
Design
- 6 countersunk pin holes on both sides each
- for clockwise and counter-clockwise rotation
- tooth configuration: alternate top bevel "WS"
- cutting material: HW HL Board 06
Advantages
Notes
- along and accross the grain, from below
Feature | Value | |
---|---|---|
Ø D = Cutting circle diameter | 200 [mm] | |
B = Cutting width | 7,0 [mm] | |
b = Body thickness | 4 [mm] | |
Ø d = Bore diameter | 75 [mm] | |
Z = No. of teeth | 48 | |
NL = Pin holes | 2x6/6,5/95 | |
Hook angle = Hook angle | 10 [°] | |
Corner∡ = Corner angle | 10 [°] | |
Cutting quality* = Cutting quality | ▲▲▲ | |
LEUCODUR = Cutting material | HL Board 06 | |
L = Delivery Status | ||
Machine/Type | Grecon | |
Dimensions entered are not listed?
available from stock |