Finger Joint Cutters 15/15 - real Z=4 or Z=5
Article
Description
Machine / Application
- finger joint machines
- machines with cross-cutting device
- For longitudinal joints in soft, hard and exotic woods, with a finger length of 15 mm
Design
- Real Z=4 or Z=5 for high feed rates
- Finger length of 15 mm
- HS suitable for soft woods
- HS Solid 34 suitable for knotty soft woods
Advantages
- HS Solid 34: high bending strength, compared to HS finger joint cutters the edge life is 1.5 - 2 times as long
- topcoat 104: the edge life is 2 times as long compared to HS finger joint cutters
Notes
- no. of cutters: see table
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z |
Partition
[mm] |
Finger joint length
[mm] |
Number of finger joints
[pc.] |
nmax
[min-1] |
Remarks | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
||||||||||||
170 | 26,4 | 14.8 | 50 | 4 | 3.8 | 15/15 | 3 | 8,000 | top finish cutter, HS | 187467 | ||
170 | 41 | 19 | 50 | 4 | 3.8 | 15/15 | 5 | 8,000 | base cutter, HS | 187712 | ||
170 | 26,4 | 14.8 | 50 | 4 | 3.8 | 15/15 | 3 | 8,000 | bottom finish cutter, HS | 187460 | ||
170 | 26,4 | 14.8 | 50 | 4 | 3.8 | 15/15 | 3 | 8,000 | top finish cutter, HS, topcoat 104 | 187466 | ||
170 | 41 | 19 | 50 | 4 | 3.8 | 15/15 | 5 | 8,000 | base cutter, HS, topcoat 104 | 187452 | ||
170 | 26,4 | 14.8 | 50 | 4 | 3.8 | 15/15 | 3 | 8,000 | bottom finish cutter, HS, topcoat 104 | 187713 | ||
170 | 26,4 | 14.8 | 50 | 4 | 3.8 | 15/15 | 3 | 8,000 | top finish cutter, HS Solid 34 | 187469 | ||
170 | 41 | 19 | 50 | 4 | 3.8 | 15/15 | 5 | 8,000 | base cutter, HS Solid 34 | 187454 | ||
170 | 26,4 | 14.8 | 50 | 4 | 3.8 | 15/15 | 3 | 8,000 | bottom finish cutter, HS Solid 34 | 187462 | ||
170 | 26,4 | 14.8 | 50 | 4 | 3.8 | 15/15 | 3 | 8,000 | top finish cutter, HS Solid 34, topcoat 104 | 187470 | ||
170 | 41 | 19 | 50 | 4 | 3.8 | 15/15 | 5 | 8,000 | base cutter, HS Solid 34, topcoat 104 | 187456 | ||
170 | 26,4 | 14.8 | 50 | 4 | 3.8 | 15/15 | 3 | 8,000 | bottom finish cutter, HS Solid 34, topcoat 104 | 187463 | ||
180 | 26,4 | 14.8 | 50 | 5 | 3.8 | 15/15 | 3 | 6,000 | top finish cutter, HS Solid 34, topcoat 104 | 187479 | ||
180 | 41 | 19 | 50 | 5 | 3.8 | 15/15 | 5 | 6,000 | base cutter, HS Solid 34, topcoat 104 | 187473 | ||
180 | 26,4 | 14.8 | 50 | 5 | 3.8 | 15/15 | 3 | 6,000 | bottom finish cutter, HS Solid 34, topcoat 104 | 187476 |