193287 - Finger Joint Cutters HS - Solid 34 - real Z=4
Product
Drawing
-
- High Speed Steel [HS]
- MEC
Technical data
Description
Machine / Application
- Finger joint machines
- Machines with and without cross-cutting device
- for longitudinal joints in knotty soft woods
Design
Cutting material: HS Solid 34
- real Z=4 for high feed rates
- Standard for PUR glueing and topcoat
- flexible tool for finger joints when using fibrous and non-fibrous PU glue
Advantages
- Thanks to Solid 34 with topcoat, the edge life is 4 - 5 times as long compared to traditional HS finger joint cutters
- high bending strength
- reduced risk of tooth breaking
- constant finger jointing quality even with high feed rates thanks to double number of teeth compared to standard design
Notes
- no. of cutters: see table
| Feature | Value | |
|---|---|---|
| Ø D = Cutting circle diameter | 170 [mm] | |
| B = Cutting width | 41 [mm] | |
| b = Hub width | 19 [mm] | |
| Ø d = Bore diameter | 50 [mm] | |
| Z = No. of teeth | 4 | |
| Partition = Partition | 3.8 [mm] | |
| Finger joint length = Finger joint length | 15/15 [mm] | |
| Number of finger joints = Number of finger joints | 5 [pc.] | |
| nmax = maximum RPM | 8,000 [min-1] | |
| L = Delivery Status | ||
| Remarks | base cutter | |
|
Dimensions entered are not listed?
available from stock |
||
