Finger Joint Cutters HS - Solid 34 - real Z=4 topcoat
Article
Description
Machine / Application
- Finger joint machines
- Machines with and without cross-cutting device
- for longitudinal joints in knotty soft woods
Design
Cutting material: HS Solid 34
- real Z=4 for high feed rates
- Standard for PUR glueing and topcoat
- flexible tool for finger joints when using fibrous and non-fibrous PU glue
Advantages
- Thanks to Solid 34 with topcoat, the edge life is 4 - 5 times as long compared to traditional HS finger joint cutters
- high bending strength
- reduced risk of tooth breaking
- constant finger jointing quality even with high feed rates thanks to double number of teeth compared to standard design
Notes
- no. of cutters: see table
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z |
Partition
[mm] |
Finger joint length
[mm] |
Number of finger joints
[pc.] |
nmax
[min-1] |
Remarks | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
||||||||||||
170 | 25,8 | 14.8 | 50 | 4 | 3.8 | 15/15 | 3 | 8,000 | top finish cutter | 193286 | ||
170 | 41 | 19 | 50 | 4 | 3.8 | 15/15 | 5 | 8,000 | base cutter | 193287 | ||
170 | 25,8 | 14.8 | 50 | 4 | 3.8 | 15/15 | 3 | 8,000 | bottom finish cutter | 193288 |