Finger Joint Cutters 20/20 - real Z=3 for PUR glueing
Article
Description
Machine / Application
- finger joint machines
- machines without cross-cutting device
- For longitudinal joints in soft, hard and exotic woods, with a finger length of 20 mm
- Flexible tool for finger joints when using fibrous and non-fibrous PU glue
Design
- Standard for PUR glueing
- Real Z=3 for high feed rates
- Finger length of 20 mm
- HS suitable for soft woods
- HS Solid 34 suitable for knotty soft woods
Advantages
- HS Solid 34: high bending strength, compared to HS finger joint cutters the edge life is 1.5 - 2 times as long
- topcoat 104: the edge life is 2 times as long compared to HS finger joint cutters
Notes
- no. of cutters: see table
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z |
Partition
[mm] |
Finger joint length
[mm] |
Number of finger joints
[pc.] |
nmax
[min-1] |
Remarks | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
||||||||||||
180 | 27,2 | 17.2 | 50 | 3 | 6.2 | 20/20 | 2 | 8,000 | top finish cutter, HS | 187591 | ||
180 | 39,6 | 19.1 | 50 | 3 | 6.2 | 20/20 | 3 | 8,000 | base cutter, HS | 187579 | ||
180 | 27,2 | 17.2 | 50 | 3 | 6.2 | 20/20 | 2 | 8,000 | bottom finish cutter, HS | 187586 | ||
180 | 27,2 | 17.2 | 50 | 3 | 6.2 | 20/20 | 2 | 8,000 | top finish cutter, HS Solid 34, topcoat 104 | 187593 | ||
180 | 39,6 | 19.1 | 50 | 3 | 6.2 | 20/20 | 3 | 8,000 | base cutter, HS Solid 34, topcoat 104 | 187580 | ||
180 | 27,2 | 17.2 | 50 | 3 | 6.2 | 20/20 | 2 | 8,000 | bottom finish cutter, HS Solid 34, topcoat 104 | 187587 |