Directly to the tool


Workpiece material

Machine

Applications

Features

LEUCO product names

Reset


Selection via tool type


192818 - Panel Sizing Saw Blades HW - Q-Cut "G5"

Product

Drawing

  • Tungsten Carbide [HW]

Comp./ Inqu. |

Technical data

Description

Machine / Application

  • horizontal panel sizing saws
  • for sizing and finish cuts in wood core plywood, plywood boards, veneered or paper-laminated wood-based panels and honeycomb panels

Design

  • vibration and noise damping ornaments
  • additional expansion slots
  • tooth configuration: G5
  • cutting material: HW HL Board 04 plus

Advantages

  • very low cutting pressure and small power consumption thanks to optimized cutting geometry
  • excellent cutting quality in wood-based materials containing fibers
  • extremely low-noise and smooth running thanks to vibration and noise damping ornaments as well as special expansion slot combinations

Notes

  • Attention: when assigning the appropriate scoring saw blades, please take into account the cutting width reduction of 4 mm!
  • NL**- Combi3 = 2/10/60 + 2/9/46 + 2/9.5/46.5 + 2/7/42
  • NL**- Combi5 = 2/7/110 + 2/9/110 + 2/8.4/130 + 2/14/110 + 4/9/100 + 4/19/120
  • NL**- Combi7 = 2/9/110 + 2/10/80 + 2/11/85 + 2/11/115 + 2/11/148 + 2/14/100 + 2/14/125 + 2/19/120
Feature Value
Ø D = Cutting circle diameter 430 [mm]
B = Cutting width 4,0 [mm]
b = Body thickness 3.2 [mm]
Ø d = Bore diameter 80 [mm]
Z = No. of teeth 90
NL = Pin holes 2/7/110 + 2/9/110 + 2/8,4/130 + 2/14/110 + 4/9/100 + 4/19/120
Hook angle = Hook angle 15 [°]
Shear∡ = Shear angle 8 [°]
Tooth geometry = Tooth configuration G5
LEUCODUR = Cutting material HL Board 04 plus
L = Delivery Status
Machine/Type Selco

Dimensions entered are not listed?
Please contact our application consulting .

available from stock
available on short notice
Delivery time on request

suitable scoring saw blade

Product picture Description Design Ident-No. Comp./ Inqu.
Scoring Saw Blades HW "KO-HR" - nn-System Ø200x4,05-4,85xØ45 Z=36 192693
|
Scoring Saw Blades HW "KO-WS" Ø200x4,05-4,85xØ45 Z=36 192760
|
Scoring Saw Blades HW "KO-WS" Ø200x4,05-4,85xØ65 Z=36 NL/DKN= 2/9/100 + 2/9/110 192762
|

available from stock
available on short notice
Delivery time on request

Downloads