NF-Panel Sizing Saw Blades HW - positive hook angle "TR-F"
Article
Description
Machine / Application
- horizontal panel sizing saws
- for dividing cuts in aluminum block materials
Design
- tooth configuration: triple chip / flat "TR-F"
- cutting material: HW HL Board 09
Advantages
- noise-reduction thanks to laser ornaments
Notes
- for stack heights up to 200 mm (for large saw diameters)
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z | NL |
Hook angle
[°] |
Tooth geometry | LEUCODUR | Machine/Type | Ident-No. | Comp./ Inqu. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Dimensions entered are not listed?
available from stock |
||||||||||||
450 | 4,5 | 3.2 | 40 | 60 | 2/13/114 | 15 | TR-F | HL Board 08 | Schelling | 189887 | ||
450 | 4,8 | 3.5 | 60 | 60 | 2/14/125 + 2/19/120 | 15 | TR-F | HL Board 08 | Holzma | 189891 | ||
620 | 5,5 | 4.2 | 40 | 60 | 2/13/114 | 15 | TR-F | HL Board 08 | Schelling | 189888 | ||
680 | 5,8 | 4.5 | 40 | 60 | 2/13/114 | 15 | TR-F | HL Board 08 | Schelling | 189889 | ||
720 | 6,0 | 4.8 | 40 | 60 | 2/13/114 | 15 | TR-F | HL Board 08 | Schelling | 189890 |