NF-Chop Saw Blades HW - negative hook angle "TR-F" topline
Product
Drawing
-
-
- Tungsten Carbide [HW]
-
Article
Description
Machine / Application
- chop and miter saws
- for clipping and mitre cuts in aluminum and plastic profiles
Design
- negative hook angle
- tooth configuration: triple chip / flat "TR-F"
- cutting material: HW HL Board 06
Advantages
- noise-reduction thanks to laser ornaments
Notes
|
Ø D
[mm] |
B
[mm] |
b
[mm] |
Ø d
[mm] |
Z | NL |
Hook angle
[°] |
Tooth geometry | LEUCODUR | Machine/Type | Ident-No. | Comp./ Inqu. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Dimensions entered are not listed?
available from stock |
||||||||||||
| 350 | 3,8 | 3.2 | 40 | 84 | 4/12/64 + 2/9/55 | -6 | TR-F | HL Board 06 | Eisele LMS II, LMS II - P V, VA - L, Graule, Ulmia, Weidmann | 193115 | ||
| 350 | 3,2 | 2.5 | 30 | 90 | 2/10/60 | -6 | TR-F | HL Board 06 | DeWALT, Haffner, Pfeiffer | 193116 | ||
| 350 | 3,2 | 2.5 | 30 | 96 | 2/10/60 | -6 | TR-F | HL Board 06 | 193117 | |||
| 350 | 3,2 | 2.5 | 30 | 108 | 2/9/55 + 2/10/60 + 4/12/64 | -6 | TR-F | HL Board 06 | 193118 | |||
| 350 | 3,2 | 2.5 | 40 | 108 | 4/12/64 + 2/9/55 | -6 | TR-F | HL Board 06 | Eisele LMS II, LMS II - PV, VA - L, Graule, Ulmia, Weidmann | 193119 | ||
| 400 | 3,8 | 3.2 | 30 | 96 | 2/12/64 + 4/15/80 | -6 | TR-F | HL Board 06 | DeWALT, Haffner | 189863 | ||
| 400 | 3,8 | 3.2 | 50 | 96 | 4/15/80 | -6 | TR-F | HL Board 06 | Kaltenbach TL 400 | 189864 | ||
| 420 | 4,0 | 3.2 | 30 | 96 | -6 | TR-F | HL Board 06 | Rapid, ELU | 189865 | |||
| 450 | 3,8 | 3.2 | 30 | 96 | 4/12/64 + 2/12/80 | -6 | TR-F | HL Board 06 | DeWALT, Haffner | 189866 | ||
| 500 | 4,0 | 3.4 | 30 | 120 | 2/10/70 | -6 | TR-F | HL Board 06 | Pfeiffer, Rapid | 189867 | ||