Directly to the tool


Workpiece material

Machine

Applications

Features

LEUCO product names

Reset


Selection via tool type


Pre-Cut Gang-Rip Saw Blades HW with HW-rakers "F" - Möhringer

Product

Drawing

  • Tungsten Carbide [HW]

Article

Description

Machine / Application

  • primary machines with and without chippers
  • for longitudinal cuts in wet and dry soft woods

Design

  • tooth configuration: flat "F"
  • cutting material: HW HL Board 20
  • type A and C with staggered double keyways

Advantages

  • extremely high bending strength and hardness of the teeth
  • tungsten carbide rakers prevent the sides of the wood from making contact with the steel plate
  • staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine

Notes

  • the saw blade is optimized according to the LEUCO company standards as well as according to the customers specifications and machine parameters after consultation with the technical engineering
  • Ident-No. is only for orientation

Table- and picture caption ...

Ø D
[mm]
B
[mm]
b
[mm]
b1
[mm]
Ø D1
[mm]
Ø d
[mm]
Z Number of rakers
[pc.]
NL Hook angle
[°]
L/R LEUCODUR Machine/Type Ident-No. Comp./ Inqu.

Dimensions entered are not listed?
Please contact our application consulting .

available from stock
available on short notice
Delivery time on request

595 5,2 3.6 6.8 190 105 20 6 8/13/156 20 L HL Board 20 Möhringer 80293989 
|
595 5,2 3.6 6.8 190 105 20 6 8/13/156 20 R HL Board 20 Möhringer 80293990 
|