HW Segments - for Linck VPM profiling aggregate
Product
Drawing
-
- Tungsten Carbide [HW]
Article
Description
Machine / Application
- Linck VPM profiling aggregate
- for longitudinal cuts in wet and dry soft woods
Design
- tooth configuration: flat "F"
- cutting material: HW HL Board 20
Advantages
- extremely high bending strength and hardness of the teeth
Notes
|
Ø D
[mm] |
B
[mm] |
b
[mm] |
b1
[mm] |
Ø D1
[mm] |
Z | L/R | Tooth geometry | LEUCODUR | Machine/Type | Ident-No. | Comp./ Inqu. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Dimensions entered are not listed?
available from stock |
||||||||||||
| 414 | 3,5 | 2.5 | 8 | 360 | 10 | L | F | HL Board 20 | Linck VPM | 80334874 | ||
| 414 | 3,5 | 2.5 | 8 | 360 | 10 | R | F | HL Board 20 | Linck VPM | 80335077 | ||
| 497 | 3,5 | 2.5 | 8 | 446 | 8 | L | F | HL Board 20 | Linck VPM | 80333596 | ||
| 497 | 3,5 | 2.5 | 8 | 446 | 8 | R | F | HL Board 20 | Linck VPM | 80335075 | ||
| 499.4 | 3,5 | 2.5 | 7 | 446 | 10 | L | F | HL Board 20 | Linck VPM | 80350396 | ||
| 499.4 | 3,5 | 2.5 | 7 | 446 | 10 | R | F | HL Board 20 | Linck VPM | 80350395 | ||
| 498.2 | 3,5 | 2.5 | 7 | 447 | 11 | L | F | HL Board 20 | Linck VPM | 80371097 | ||
| 498.2 | 3,5 | 2.5 | 7 | 447 | 11 | R | F | HL Board 20 | Linck VPM | 80371098 | ||